EUSL-U30 Series Dual-Channel Slot Type Photoelectric Level Switch

The XSZ EUSL-U30 series is a dual-channel, slot-type photoelectric level switch described for elevator leveling and position detection. The supplied specifications list two independent optical axes, a 30 mm detection distance, opaque targets larger than Ø12 mm, a 10–30 VDC supply and 1 ms maximum operate/reset response. EUSL-U30R3C4 is the NPN version; EUSL-U30X3C4 is the PNP version. Confirm the mounting drawing, channel wiring and application test conditions before selecting a model.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response
Category:

Description

EUSL-U30 dual-channel slot detection

The EUSL-U30 series is a slot-type photoelectric level switch described for elevator leveling and related position-detection tasks. Two independent optical axes provide separate A/B detection channels, allowing the controller to monitor two positions through one sensor assembly.

The supplied series data lists a 30 mm detection distance and an opaque target larger than Ø12 mm. EUSL-U30R3C4 provides NPN output; EUSL-U30X3C4 provides PNP output. These are separate models, not output modes selectable on one device.

Sensing formatSlot type; two independent optical axes
Detection distance listed30 mm
Target referenceOpaque object larger than Ø12 mm
Output selectionsNPN or PNP, by model code

Two optical axes for elevator leveling

The two sensing axes have independent outputs. In an elevator leveling arrangement, this lets the control system receive separate signals as the target passes the A and B detection positions. The source lists red and yellow channel indicators, plus a green circuit indicator, to support on-site status checks.

The actual target must be opaque and positioned to interrupt the required optical path. Confirm the target diameter, approach direction, channel spacing and installation geometry with the current drawing before treating the stated 30 mm figure as a mounting dimension.

Technical specifications

Detection and response

Detection typeSlot-type photoelectric
Optical axesTwo, with independent A/B channel outputs
Detection distance30 mm, as listed in the supplied series data
Detectable objectOpaque object larger than Ø12 mm
Operate / reset response1 ms maximum

Power, output and indicators

Supply voltage10–30 VDC
Output typeOpen collector; NPN or PNP according to model
Load current100 mA maximum
Channel indicatorsRed and yellow for A/B channels
Circuit indicatorGreen
Protection listedReverse-supply-polarity and instantaneous-overvoltage protection

Environment and construction

Ambient lightSunlight: 10,000 lx maximum
Housing / lensABS / PC
ConnectionPre-wired 2 m cable

Choose the NPN or PNP model

Select the code that matches the controller input. Both codes are listed in the supplied EUSL-U30 series data; they should be treated as separate electrical selections until the product structure and wiring are confirmed.

ModelOutput selection
EUSL-U30R3C4NPN open collector
EUSL-U30X3C4PNP open collector

Application and installation checks

For elevator leveling or another slot-detection position, confirm that the moving target interrupts the intended optical axis and that the two channel signals match the controller’s required sequence. The listed opaque-target size and response time should be checked under the actual speed, spacing and ambient-light conditions.

Before specifying an EUSL-U30 model

  • Choose the NPN or PNP code for the controller input; verify the A/B output wiring for that exact code.
  • Check target opacity, diameter, position and travel through both optical paths.
  • Verify the 30 mm dimension, channel spacing and mounting clearances using the current drawing.
  • Confirm the 10–30 VDC supply, load current, 2 m cable routing and actual light/environment conditions.

Frequently asked questions

Are the two optical axes independent?

Yes. The supplied series information lists two optical axes with independent A/B channel outputs.

Can one EUSL-U30 unit switch between NPN and PNP?

No such switching is specified. EUSL-U30R3C4 is listed as NPN and EUSL-U30X3C4 as PNP; choose the model for the controller.

What target is listed for detection?

The supplied specification lists an opaque object larger than Ø12 mm. Confirm the actual target’s orientation and travel through the slot.

Is a wiring diagram available in this description?

A current model-specific diagram should be checked before connection. Confirm the channel wiring, output type and cable conductors for the selected code.