PR12-2DN M12 2 mm Shielded Proximity Sensor

The XSZ PR12-2DN is an M12 shielded proximity sensor with NPN normally open output and a 2.0 mm +/-10% sensing distance. The supplied product image shows a 45 mm length reference, 12 mm body diameter, two hex nuts, and a red LED indicator. The shielded M12 series also lists NPN, PNP, DC two-wire, and AC two-wire output choices. Confirm cable, wiring, and target compatibility with XSZ before order.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

Description

2 mm shielded metal detection in an M12 body

The XSZ PR12-2DN is the DC NPN normally open model in the M12 shielded proximity-sensor range. Its listed sensing distance is 2.0 mm ±10%, with a 0–1.6 mm setting distance.

Those distances are specified against an iron 12 × 12 × 1 mm reference target. Check the actual metal, target size and operating gap before fixing the sensor position; non-magnetic metals may be detected at a shorter distance.

Select the shielded format for the mounting layout

A shielded M12 sensing head can be considered when the active face needs to sit within a metal mounting area. Confirm the permitted flush position in the PR12-2DN drawing; the thread size alone does not establish the exact bracket dimensions or mounting tolerance.

The NPN normally open output should be matched to the controller input and switching sequence using the approved wiring diagram. Other NPN, PNP and two-wire codes in the range are separate products, not settings on PR12-2DN.

PR12-2DN technical specifications

Check the current PR12-2DN datasheet before finalizing electrical ratings, mounting dimensions or environmental requirements.

Detection and construction

Model / installationPR12-2DN / M12 shielded
Sensing distance2.0 mm ±10%
Setting distance0–1.6 mm
Standard targetIron, 12 × 12 × 1 mm
Detectable materialMagnetic metal; distance decreases for non-magnetic metal
HysteresisLess than 10% of sensing distance
Housing / sensing faceNickel-plated brass / ABS

Electrical and environment entries

OutputDC NPN, normally open
DC supply12–24 VDC listed; confirm the exact permitted range and ripple limit before wiring
Consumption currentLess than 13 mA, NPN/PNP DC series entry
Control-output entryLess than 300 mA for NPN/PNP DC series; confirm allowable load
Circuit protectionReverse-connection, surge absorption and load short-circuit protection, listed for DC series
Operating / storage environment−30 to +65 °C; no freezing or condensation; 35–95% RH
Insulation resistanceAt least 50 MΩ at 500 VDC, between live parts and housing
Protection classIP67 listed; confirm for this exact model

Other shielded M12 model codes

The codes below are separate products, not output choices that can be changed on PR12-2DN.

PR12-2DN2DC NPN normally closed
PR12-2DP / PR12-2DP2DC PNP normally open / normally closed
PR12-2DO / PR12-2DCDC two-wire normally open / normally closed
PR12-2AO / PR12-2ACAC two-wire normally open / normally closed

Installation checks for the selected model

  • Compare the actual metal target and size with the 12 × 12 × 1 mm iron reference.
  • Plan the working gap within the listed 0–1.6 mm setting distance, then confirm margin under real conditions.
  • Check the approved flush-mount drawing, body length and bracket dimensions.
  • Confirm the actual permitted DC supply, NPN wiring, connector or cable, output load and controller input.
  • Check the exact-model environmental and IP rating if they are critical to the installation.

Frequently asked questions

What is the difference between sensing and setting distance?

The listed sensing distance is 2.0 mm ±10%; the setting distance is 0–1.6 mm. Use the latter as a starting point for the installed operating gap, then verify performance with the real target.

Can the PR12-2DN sensing face sit flush with metal?

It is listed as a shielded model. Confirm the permitted flush position and any clearance in the exact-model mounting drawing before machining the bracket.

Can PR12-2DN be switched to PNP or two-wire output?

No such switching is established. The supplied matrix assigns PNP and two-wire configurations their own model codes.

Which electrical details still need confirmation?

Confirm the exact permitted supply range, NPN wiring, connector or cable and allowable output load against current PR12-2DN documentation.

Reviews

There are no reviews yet.

Be the first to review “PR12-2DN M12 2 mm Shielded Proximity Sensor”

Your email address will not be published. Required fields are marked *