K Wired Slot Photo Sensor

The EUSL-U30 K-wired series is a 30 mm slot photo sensor family for detecting opaque targets passing through the slot. The supplied product information lists two optical axes, 10–30 VDC power, a 2 m pre-wired cable, and NPN or PNP model options. Choose the output type and confirm the wiring and target conditions for your machine before ordering.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response
Category:

Description

EUSL-U30 series

K-wired slot photo sensor for 30 mm openings

The EUSL-U30 series detects opaque targets as they pass through a 30 mm slot. It has two optical axes and offers separate NPN and PNP model options. Select the model to match the controller input and verify the target and wiring requirements for the installation.

Detection arrangement

The 30 mm figure describes the slot opening, not a sensing distance from the sensor face. The listed detectable target is an opaque object above φ12 mm. Check that the actual part crosses the intended beam path with sufficient clearance for its size, orientation and movement.

Light-ON and Dark-ON operation are selectable through a control wire. Use the approved model-specific wiring diagram to confirm wire colors and output state before connecting the sensor.

Technical specifications

ParameterValue
Slot opening30 mm
Detectable targetOpaque object above φ12 mm
Optical axesTwo
Supply voltage10–30 VDC; ripple P-P 10% max.
OutputOpen collector; NPN or PNP by model
Maximum load current100 mA
Operating modeLight-ON / Dark-ON, selectable by control wire
Ambient light10,000 lx max. (sunlight)
Housing / lensABS / PC
ConnectionPre-wired cable, 2 m

Choose the output model

ModelOutput type
EUSL-U30R3C4-K-WNPN
EUSL-U30X3C4-K-WPNP

Confirm the exact model number and its wiring diagram when specifying the controller connection.

Application and selection notes

A slot photo sensor can be evaluated for part-presence or position detection where an opaque target passes through the opening. Allow space for the 30 mm slot and check the target size, path, mounting stability and surrounding light at the actual machine.

Before installation, match the NPN or PNP output to the control input, keep the load within the listed current limit and confirm the Light-ON / Dark-ON control wiring from the approved drawing. This product information does not establish a safety-rated function.

Frequently asked questions

Is the 30 mm value the detection distance?

No. It is the opening of the slot through which the target passes. The listed detectable target is an opaque object above φ12 mm.

Which model should I choose for an NPN or PNP input?

EUSL-U30R3C4-K-W is the NPN option; EUSL-U30X3C4-K-W is the PNP option. Confirm the controller input and approved wiring diagram before ordering.

Does the sensor have two optical axes?

Yes. The series has two optical axes. Confirm their positions and output behavior against the model-specific drawing for the intended target path.