LJC12A3-A-Z/BX 6 mm Proximity Sensor

The XSZ LJC12A3-A-Z/BX is a 6 mm proximity sensor with NPN normally open output. The supplied model table also lists NPN NC, PNP NO, and PNP NC variants. It is listed for any dielectric material. Confirm dimensions, cable, wiring, and application compatibility with XSZ before order.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

 

Description

LJC12A3-A-Z/BX product overview

The XSZ LJC12A3-A-Z/BX is a proximity sensor with a listed 6 mm detection distance for dielectric-material targets. This model has an NPN normally open (NO) output. Its companion NPN NC and PNP NO/NC options have separate part numbers.

Use the actual target material and geometry to assess detection, then match the NPN NO signal and supply to the controller. Confirm the approved voltage range, dimensions and wiring for this exact model before installation.

ModelLJC12A3-A-Z/BX
Listed detection distance6 mm
OutputNPN, normally open
Listed target classDielectric materials

6 mm sensing for dielectric-material targets

The LJC12A3 series information lists a 6 mm detection distance for dielectric materials. The 6 mm figure describes sensing distance; it is not a housing diameter or detection-hole size.

Actual detection depends on the target and installation conditions. Check the intended material, size, position and approach direction with a sample of the real process before treating the listed distance as an operating margin.

Technical specifications

Review these LJC12A3 series values together with the target and controller requirements. Verify the current BX specification before final electrical design and installation.

Detection and output

Detection distance6 mm
Detectable targetDielectric materials; check the actual target and setup
HysteresisLess than 10% of sensing distance
Output configuration for this SKUNPN, normally open (NO)

Series electrical data

DC supply listing12–24 VDC (6–36 VDC also listed); verify the approved BX operating range before wiring
Pulse (P-P)Less than 10%; confirm the DC supply requirement
Consumption current, N.P type listingLess than 13 mA; verify BX applicability
Control output, N.P type listingLess than 300 mA; verify BX applicability and load conditions

Environmental and construction data

Operating and storage temperature−30 to +65 °C; no freezing or condensation
Ambient humidity35–95% RH
Protection classIP67
Housing and sensing faceNickel-plated brass housing; ABS sensing face
Insulation resistanceAt least 50 MΩ at 500 VDC, between energized parts and housing

Sensing-distance variation with temperature

The series table lists a variation of up to ±15% from the +23 °C sensing distance over −30 to +65 °C, and up to ±10% over −25 to +60 °C. Confirm the current test conditions before using these figures as a design limit.

Related 6 mm output models

LJC12A3-A-Z/BX is the NPN NO model on this page. The other output/logic combinations below are separate part numbers, not user-switchable settings on the BX unit.

ModelOutputDistance
LJC12A3-A-Z/BX — this productNPN NO6 mm
LJC12A3-A-Z/AXNPN NC6 mm
LJC12A3-A-Z/BYPNP NO6 mm
LJC12A3-A-Z/AYPNP NC6 mm

Application and installation checks

This model is a candidate for non-contact presence detection when a dielectric-material target passes the sensing position. Confirm the real target and mounting arrangement in the application; the source does not establish a universal response for every material or target shape.

Before selecting this model

  • Check the target material, size, position and expected sensing gap against the listed 6 mm distance.
  • Match the NPN NO output to the controller input; choose a different model code if NC or PNP is needed.
  • Confirm the approved supply range, output load and wiring diagram before connection.
  • Request the current mechanical drawing and connection details to check mounting space and cable routing.

Frequently asked questions

Does 6 mm describe the sensor’s outer diameter?

No. The supplied information identifies 6 mm as the detection distance. It does not provide a verified outer diameter or full mechanical drawing.

Which output does LJC12A3-A-Z/BX provide?

The model table identifies BX as NPN normally open. AX is NPN NC; BY and AY are the separate PNP NO and PNP NC models.

Will the sensor detect every dielectric target at 6 mm?

The source lists dielectric materials and a 6 mm distance, but it does not define identical performance for all target sizes, shapes or installation conditions. Check the actual target in the intended setup.

What should be confirmed before wiring?

Obtain the current BX wiring diagram and verify the approved DC supply range, output load and controller input. The series listing gives both 12–24 VDC and a parenthetical 6–36 VDC range without defining their relationship.

Reviews

There are no reviews yet.

Be the first to review “LJC12A3-A-Z/BX 6 mm Proximity Sensor”

Your email address will not be published. Required fields are marked *