Description
E3K100 remote photoelectric switch overview
The XSZ E3K100 is presented as a remote photoelectric switch family for non-contact object detection. A photoelectric sensing point uses light to detect an object, but the required optical arrangement depends on the exact model selected.
The supplied series material mentions diffuse reflective, retro-reflective and through-beam arrangements. These are different configurations, not modes confirmed to be selectable on a single E3K100 unit. Choose the complete model code before specifying distance, power supply, output or wiring.
Choose the optical arrangement first
The intended sensing task determines where the light source, receiver, target and any reflector need to be mounted. The descriptions below explain the arrangements named in the supplied series material; they do not establish which one belongs to an unconfirmed E3K100 variant.
| Arrangement | Installation question |
|---|---|
| Diffuse reflective | Will the actual target return enough light at the planned distance? |
| Retro-reflective | Is there room to mount and align the required reflector? |
| Through-beam | Can separate emitter and receiver positions be provided across the detection path? |
Information needed for the selected E3K100 model
The series description does not identify a complete variant code or associate its numerical ratings with one model. Confirm the following values from the selected unit’s current datasheet rather than combining the highest figures from different sensing arrangements.
- Exact model code, optical method, reflector or separate emitter/receiver requirements.
- Rated sensing distance, reference target and practical working margin.
- Supply voltage, output type, contact or load rating and switching logic.
- Response time, conductor assignments and current wiring diagram.
- Mounting dimensions, cable/connector and environmental protection for the planned location.
Application and installation checks
A selected E3K100 configuration may be evaluated for ordinary object-presence or position feedback at a conveyor or machine opening after its sensing geometry and environmental limits are confirmed. Target size, surface, background and alignment can materially change the useful working distance.
The available series information does not establish a certified protective or collision-avoidance function. Use a separately specified safety-rated device for guarding or other safety-critical duties.
Frequently asked questions
Is E3K100 one fixed sensing configuration?
The supplied material describes several series-level optical arrangements without identifying a complete model code. Confirm the exact variant before ordering.
What sensing distance does E3K100 provide?
A model-specific distance cannot be established from the available series description. Confirm the exact code, optical arrangement, reference target and required accessories.
Can I choose NPN, PNP or relay output on the same unit?
The source names these as possible output families, not as selectable settings on a confirmed E3K100 model. Check the complete code and wiring sheet for the required output.
Is the sensor suitable for fog, dust or outdoor safety detection?
No such suitability is established by the available information. Check the exact model’s environmental ratings and test the optical path; do not treat this page as evidence of a safety function.





Reviews
There are no reviews yet.