Description
PR08-1.5DN product overview
The XSZ PR08-1.5DN is the shielded M8 DC NPN normally open (NO) model in the supplied proximity-sensor range. It is listed with a 1.5 mm ±10% sensing distance and a 0–1.2 mm setting distance for a close-range detection point.
The reference target is iron measuring 8 × 8 × 1 mm. Confirm the actual target material and dimensions, mounting gap and controller interface before selecting this model for a machine.
| Model | PR08-1.5DN |
|---|---|
| Installation type | M8 shielded |
| Listed sensing distance | 1.5 mm ±10% |
| Electrical output | DC NPN, normally open |
M8 shielded sensing at a close target gap
The 1.5 mm value is the source-listed sensing distance, while 0–1.2 mm is the separate setting distance. The iron reference target establishes the context for those figures; a different material, size or approach path should be checked with the actual part.
For a machine-presence check, confirm that the target passes the sensing face reliably within the planned gap and that the NPN NO signal matches the controller input.
Technical specifications
The following values are from the supplied M8 shielded range specification. Obtain the current exact-model datasheet and drawing before finalizing the installation.
Sensing data
| Body designation | M8 shielded |
|---|---|
| Sensing distance | 1.5 mm ±10% |
| Setting distance | 0–1.2 mm |
| Standard target | Iron, 8 × 8 × 1 mm |
| Hysteresis | Less than 10% of sensing distance |
DC NPN NO electrical data
| Output configuration | DC NPN, normally open (NO) |
|---|---|
| Listed DC supply | 10–30 VDC |
| Consumption current | Less than 13 mA (source N.P. group) |
| Insulation resistance | At least 50 MΩ at 500 VDC, between energized parts and housing |
Environment and materials
| Operating and storage temperature | −30 to +65 °C; no freezing or condensation |
|---|---|
| Humidity | 35–95% RH |
| Protection class | IP67 (source-listed) |
| Housing | Nickel-plated brass |
| Sensing face | ABS |
Related shielded M8 model codes
PR08-1.5DN is the DC NPN NO product on this page. The other codes below are separate electrical and logic versions, not settings that can be switched on this unit.
| Electrical type | Logic | Model code |
|---|---|---|
| DC NPN | NO | PR08-1.5DN — this product |
| DC NPN | NC | PR08-1.5DN2 |
| DC PNP | NO | PR08-1.5DP |
| DC PNP | NC | PR08-1.5DP2 |
| DC two-wire | NO | PR08-1.5DO |
| DC two-wire | NC | PR08-1.5DC |
Applications and installation checks
The shielded M8 form may suit a compact metal-presence check when the actual target and mounting clearance are validated. The iron reference dimensions matter: the listed 1.5 mm sensing distance should not be assumed for every metal part.
Confirm before ordering
- Actual metal target material, dimensions and travel path at the planned 0–1.2 mm gap.
- DC supply and NPN NO compatibility with the controller input.
- Allowable output load, cable/connector type and wiring arrangement.
- Current body drawing, mounting clearance and environmental exposure.
Frequently asked questions
What does the 1.5 mm figure describe?
It is the listed sensing distance for this shielded M8 model. The separate setting-distance entry is 0–1.2 mm.
Is PR08-1.5DN the NPN normally open version?
Yes. The supplied model matrix maps this code to DC NPN NO. The PNP and two-wire codes are separate products.
Does the sensing distance apply to every metal?
Not necessarily. The source uses an 8 × 8 × 1 mm iron standard target. Check actual target size, material and mounting gap before relying on the nominal figure.
What electrical details still need confirmation?
Confirm the current wiring diagram, connection style and allowable output load for this exact model before connecting it to a controller.






Reviews
There are no reviews yet.