Description
30 cm photoelectric detection with an NPN NO output
The XSZ E3F-DS30C4 is a cylindrical photoelectric sensor described for fixed-point object detection in industrial equipment. The supplied model information lists a 30 cm sensing distance and a DC three-wire NPN normally open output.
Use the 30 cm figure as a selection starting point. The actual detection result depends on the target and installation; the supplied material does not specify the optical sensing method or reference target.
Choose the detection point around the target
This sensor can be evaluated for part presence, carrier passage or position confirmation beside a conveyor, packaging machine or assembly fixture. Check the real target’s size, color and surface, along with its background and travel path, before relying on the listed range.
Its source-described orange ABS cylindrical housing may suit a bracketed detection point. Confirm the mounting drawing and cable exit before specifying a bracket or drilling a panel.
E3F-DS30C4 specifications supplied
The entries below are drawn from the supplied product description. Check the current XSZ datasheet for final selection and installation.
| Model | E3F-DS30C4 |
|---|---|
| Product type | Cylindrical photoelectric sensor |
| Sensing-distance entry | 30 cm; target and test conditions not supplied |
| Output described | DC three-wire NPN, normally open |
| Housing material / color | ABS / orange, as described |
| Weight entry | 55 g; confirm against the current datasheet |
Check before installation
- Test the real target and background at the planned mounting distance.
- Confirm the approved supply-voltage range, output load and NPN wiring diagram for this exact model.
- Match the output to the controller’s actual input circuit and required switching sequence.
- Verify dimensions, bracket space, cable routing, response time and operating environment.
Frequently asked questions
What output does E3F-DS30C4 provide?
The supplied model description lists a DC three-wire NPN normally open output. Check the approved wiring diagram and controller input before connection.
Will it detect every object at 30 cm?
The 30 cm figure is source-listed without a reference target or test method. Confirm performance with the actual object and background.
What supply voltage should be used?
The available material does not establish a reliable rated supply range for this exact XSZ model. Use the current label or datasheet before powering it.
What dimensions are needed for mounting?
Use a current model-specific dimensional drawing. The supplied body-size entry needs confirmation before a bracket is finalized.






