Description
E3Z square photoelectric sensor range
The XSZ E3Z series brings diffuse-reflective, retro-reflective and through-beam detection into a compact square/rectangular sensor range. These are different sensing configurations: choose the one that fits the target, available mounting positions and required operating distance.
The listed maximum sensing distances are model-dependent. A diffuse sensor’s 1 m reference, a retro-reflective sensor’s 4 m reference and a through-beam sensor’s 15 m reference are not interchangeable ratings for one unit.
Choose the detection configuration
Start with the target and installation geometry, then choose a configuration whose verified model range covers the actual sensing gap. The table below gives series-level maximum-distance references, not guaranteed distances for every material or object.
| Detection mode | Listed maximum | Selection check |
|---|---|---|
| Diffuse reflective | Up to 1 m | Verify the actual target surface, size and distance. |
| Retro-reflective | Up to 4 m | Confirm the reflector arrangement and target conditions. |
| Through-beam | Up to 15 m | Confirm the emitter/receiver arrangement and alignment. |
E3Z series technical references
The following are range-level values. Match them to the selected E3Z model before deciding on power, output wiring, switching behavior or environmental suitability.
Optical and switching options
| Detection configurations | Diffuse reflective; retro-reflective; through-beam |
|---|---|
| Light-source options | Infrared LED or visible red LED, depending on version |
| Control-output choices | NPN or PNP open collector, depending on model |
| Switching mode | Light-ON / Dark-ON selection listed for the series; confirm the chosen version |
| Response time | 1 ms maximum in the series table; confirm the exact model and test conditions |
Power, protection and environment
| Supply in series table | 12–24 VDC ±10%; ripple below 10% peak-to-peak |
|---|---|
| Maximum control-output current | 100 mA (series table; verify selected model) |
| Listed protection | Reverse-polarity and output short-circuit protection; mutual-interference prevention (confirm model coverage) |
| Operating temperature | −25 to +55 °C |
| Protection rating | IP67 (series table; confirm selected model) |
Application and installation planning
An E3Z configuration can be evaluated for object presence, passage or position checks in a machine or conveyor. The correct mode depends on the target, background, mounting positions and operating distance. Select a model using those conditions rather than the largest distance shown for the range.
Details to confirm for the chosen E3Z model
- Target size, surface and motion; required sensing distance and detection mode.
- Emitter/receiver or reflector layout where required, including alignment and available mounting space.
- NPN or PNP interface, Light-ON/Dark-ON behavior, supply and output load.
- Exact body drawing, cable or connector, wiring diagram and environmental rating.
Frequently asked questions
Does every E3Z sensor detect objects at 15 m?
No. The 15 m figure is a maximum reference for a through-beam version. Diffuse and retro-reflective versions have different listed limits, and the exact range depends on the chosen model and installation.
Which E3Z detection mode should I choose?
Compare the target and operating gap with the available mounting geometry. Diffuse, retro-reflective and through-beam versions use different optical arrangements and have different listed maximum distances.
Are NPN and PNP outputs on the same unit?
The series lists NPN or PNP open-collector choices; the supplied information does not identify a single unit that switches between them. Confirm the output of the exact model before ordering.
Can I use the circuit diagram from another E3Z version?
Use the wiring diagram for the selected model and connection type. Confirm the output, Light-ON/Dark-ON setting and cable or connector details before applying power.




