Set the working distance around your target, mounting position and operating conditions.
Material and target size affect the usable distance, depending on the sensing principle.
With reflective photoelectric sensors, surface color and gloss can affect detection.
Transparent targets need a suitable optical sensing method and application testing.
Align the sensing face or optical axis with the target and its direction of travel.
Check nearby metal or reflective surfaces against the selected sensor's mounting requirements.
Check response time at line speed and detection stability under actual operating conditions.
The right sensing distance depends on your target, installation and operating conditions.
Detect moving products reliably as they pass through the sensing area.
Confirm a defined machine position within the required sensing distance.
Consider target size and mounting precision when setting the distance.
Test transparent, dark or reflective targets with a suitable sensing method.
| Your Constraint | What We Evaluate | Validation Point |
|---|---|---|
Fixed Mounting Position Limited space or specific mounting position. | Feasible sensing distance based on the mounting position and angle. | Confirm stable detection with your actual installation. |
Changing Target Size Multiple product sizes or small targets. | Effect of target size and material on the sensing distance. | Verify detection with representative targets from your application. |
Nearby Background Surfaces or objects near the target. | Influence of background distance, material and layout on detection. | Check for stable detection without unwanted background signals. |
Higher Line Speed Faster conveyor or short detection time. | Sensor response and detection stability under your operating conditions. | Validate reliable detection at your actual line speed. |
The final working range is confirmed using the actual target and installation.
A good starting point for many applications.
For special targets or challenging conditions.
Provide the key information below to help us evaluate the right sensing distance for your application.
Actual samples and installation photos can improve the accuracy of our evaluation.
We recommend testing with your actual target, installation and operating conditions.
Confirm target type, size, material and appearance.
Select suitable sensor types and models.
Provide actual samples or representative targets.
Verify detection with your installation and operating conditions.
Finalize the sensing distance and model based on test results.
Catalog values are a starting point. Confirm stable detection across your actual target positions, background and operating conditions.
The effect depends on the sensing principle. Target size, color, surface finish and transparency can affect reflective photoelectric detection. For inductive sensors, target material and size are more relevant than color. Test the actual target variations with the selected model.
A longer-range model or a different sensing arrangement may be appropriate. Adjustment, where supported, does not guarantee reliable operation beyond the specified range. Share the required gap, target details and mounting space so the options can be reviewed and tested.
Background objects and reflections can affect photoelectric detection. Nearby metal can affect an inductive sensor if mounting clearances are not followed. Check the selected model's installation requirements and test with surrounding surfaces in their actual positions.
Test the nearest and farthest target positions, target variations, background, mounting angle and operating speed. Confirm that the output switches reliably and that the machine control system receives the signal. Include relevant environmental conditions and record the results before approving the specification.
Share the target, mounting distance and operating conditions to begin.