Description
SZ-M137-85DN product overview
The XSZ SZ-M137-85DN is a ring proximity sensor for metal parts moving through an 85 mm opening. This specific model has an NPN normally open (NO) output and a listed 10–30 VDC operating range.
Its pass-through format can be evaluated for part-presence or passage detection where the target travels through the ring. Select the opening size, output type and timing for the actual part and machine before ordering.
| Model | SZ-M137-85DN |
|---|---|
| Detection opening | 85 mm |
| Output | NPN NO |
| Supply | 10–30 VDC |
85 mm ring detection for metal parts
The 85 mm measurement refers to the opening through which the target passes, not the outside width of the housing. Confirm that the part and its travel path fit inside the ring with enough clearance for movement and installation.
This model is specified for metal targets. Target material, size, orientation and speed should be checked against the required detection result. For this NPN NO model, also confirm that the controller input and wiring arrangement are compatible.
Technical specifications
Review the mechanical, electrical, detection and environmental values together when selecting this model for a machine. Ask XSZ for the current datasheet and dimensional drawing before finalizing a purchase or design.
Product type and mechanical dimensions
| Sensor type | Proximity sensor |
|---|---|
| Product type | Ring proximity sensor |
| Detection method | In-ring detection |
| Detectable target | Metal |
| Detection-hole diameter | 85 mm |
| Housing dimensions | 137 × 115.5 × 54 mm |
| Mounting holes | 4 × Ø8.8 mm |
Electrical specifications
| Output configuration | NPN, normally open (NO) |
|---|---|
| Operating voltage | 10–30 VDC |
| Control input | 200 mA |
| Control output | 200 mA |
| Consumption current | Less than 10 mA |
| Residual voltage | Less than 2.5 V |
Detection performance
| Hysteresis | 1–5% |
|---|---|
| Sensing line speed | 50–3000 m/min |
| Repeat accuracy | Less than 3% |
| Response time | Confirm with XSZ for the intended application |
Environmental and construction details
| Working temperature | −25 to +70 °C |
|---|---|
| Storage temperature | −40 to +85 °C |
| Protection class | IP67 |
| Housing material | PBT / ABS |
| Indicator | Red LED |
| Cable length | 2 m |
| Circuit protection | Short-circuit protection and polarity protection |
Related 85 mm ring proximity sensor models
SZ-M137-85DN is the NPN NO product described here. The other part numbers below are separate 85 mm selections, not settings that change the output of this unit.
| Output type | Logic | Model |
|---|---|---|
| NPN | NO | SZ-M137-85DN — this product |
| NPN | NC | SZ-M137-85DN2 |
| PNP | NO | SZ-M137-85DP |
| PNP | NC | SZ-M137-85DP2 |
| DC | NO | SZ-M137-85DO |
| DC | NC | SZ-M137-85DC |
For another output configuration, request the matching model’s current wiring diagram before changing the controller design.
Applications and installation checks
Typical applications
- Detecting a metal part as it passes through the 85 mm opening.
- Providing a part-passage signal to a counting station when the target and timing are suitable.
- Monitoring metal-part movement in automated material-handling equipment.
Installation considerations
Allow room for the 137 × 115.5 × 54 mm housing, four Ø8.8 mm mounting holes and cable route. Position the part’s travel path inside the opening; confirm clearance, alignment and the location of the indicator before fixing the mounting plate.
What to confirm before ordering
- Metal target material, part size and position within the 85 mm opening.
- Required line speed, detection timing and controller input type.
- Available mounting space, cable length and cable route.
- 10–30 VDC supply, NPN NO wiring and operating environment.
Frequently asked questions
What does the 85 mm dimension describe?
It is the diameter of the detection opening. The listed outside housing dimensions are 137 × 115.5 × 54 mm.
Is SZ-M137-85DN the NPN normally open model?
Yes. SZ-M137-85DN is the NPN NO selection among the 85 mm models listed above. Check the current wiring diagram before connecting it to a controller.
Can it be used for counting moving metal parts?
A counting station is a possible use when the part passes through the opening, but the response time must be confirmed against the actual target and speed before selection.
What should I provide to confirm the correct sensor?
Provide the target material and dimensions, its path through the ring, line speed, supply voltage, controller input requirement and any mounting or wiring drawing.





Reviews
There are no reviews yet.