Description
CDD-11N close-range diffuse detection
The XSZ CDD-11N is a metal-housing diffuse-reflective photoelectric sensor. It detects light returned from the target, so the sensing point does not require a separate reflector. The supplied product specifications list a 10 cm sensing distance, a three-wire NPN output and 10–30 VDC operation.
The housing is listed as nickel-plated copper with IP67 ingress protection. These characteristics make the model a candidate for close-range object-presence checks where a compact metal sensor is preferred. Confirm the actual workpiece and installation conditions before setting the sensor position.
Working with the 10 cm sensing distance
Diffuse detection depends on the amount of light the target returns. Material, color, size, surface finish and approach angle can change the practical sensing point. Treat the listed 10 cm as a model specification to be checked with the real target, not as a universal range for every object.
Position the sensor so the workpiece can be detected consistently throughout its travel, then test the closest and farthest expected target positions. Check surrounding surfaces and machine motion for unwanted reflections or missed signals.
CDD-11N technical specifications
The values below are listed in the supplied CDD-11N product material. Use the current model datasheet and wiring diagram for final design.
Detection and electrical data
| Model | CDD-11N |
|---|---|
| Sensing method | Diffuse reflective |
| Sensing distance | 10 cm, as listed; test with the intended target |
| Supply voltage | 10–30 VDC |
| Output | DC three-wire NPN; confirm NO/NC switching logic |
| Response time | Less than 2 ms, as listed |
Housing and installation
| Housing material | Nickel-plated copper |
|---|---|
| Ingress protection | IP67, as listed |
| Status indication | LED indication; confirm display details |
| Housing color | Silver |
| Listed weight | 121 g; verify whether this includes the cable |
Application and installation checks
CDD-11N can be evaluated for checking a workpiece, carrier or fixture near a machine station. The close-range diffuse arrangement is most useful when the target is presented consistently to the sensing face and the controller needs a simple presence signal.
Before specifying CDD-11N
- Test the actual target material, color, surface and size across the intended sensing position.
- Confirm the NPN output’s NO/NC behavior, load rating and wiring against the controller input.
- Check housing dimensions, mounting method and cable routing on the current drawing.
- Verify IP67 installation conditions, connector or cable sealing, operating temperature and exposure to liquids or chemicals.
Frequently asked questions
Does CDD-11N require a reflector?
No separate reflector is specified. Its diffuse method uses light returned from the target itself.
Is the 10 cm distance the same for every target?
Not necessarily. Check the real target’s material, size, color and angle at the intended position; the supplied page does not give a reference target for the listed distance.
What output should the controller support?
The supplied specification identifies a DC three-wire NPN output. Confirm the exact NO/NC switching logic, connection diagram and controller input compatibility before wiring.
Does IP67 mean the sensor suits every wet process?
No. Confirm the completed installation’s sealing, cable or connector details, temperature and chemical exposure for the operating environment.






