XSZ compact slot type photoelectric sensor

XSZ Compact Slot Type Photoelectric Sensor is specially designed for precision automation equipment with limited space. This series adopts a standard 5mm slot width design and is equipped with a high penetration infrared LED light source, which can quickly and accurately detect opaque small objects as small as 2 × 0.8mm. Its response time can reach up to 1ms, and it supports free switching between L-ON (incoming light conduction) and D-ON (shading conduction).

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response
Category:

Description

Compact slot sensing for small opaque parts

XSZ compact slot-type photoelectric sensors bring the emitter and receiver together around a narrow U-shaped opening. The series information lists a standard 5 mm slot width, an infrared LED light source and detection of an opaque object as small as 2 × 0.8 mm under its specified conditions.

The 45 Series and 67 Series are listed in different housing and connection formats. Select the exact model around the part that will cross the slot, the required output, mounting space and the controller connection.

What the 5 mm slot rating means

In the supplied series table, 5 mm is identified as the standard slot width. It is the distance across the opening, not a promise to detect targets 5 mm outside the sensor. The listed minimum sensing object is an opaque target measuring 2 × 0.8 mm.

To assess a small part, check its opacity, dimensions, orientation and path through the slot. Keep the target’s movement within the sensing gap and validate detection under the actual mounting and speed conditions.

Choose the housing and connection format

The older series information names the following configurations but does not provide individual ordering codes or dimension drawings. Confirm the exact variant before specifying the installation.

Listed formatWhat to verify for selection
45 SeriesExact model code, housing dimensions, mounting pattern and connection method
67 Series — pre-wiredCable length, exit direction, wiring and available output
67 Series — plug-inMating connector, pinout, available output and mounting clearance

NPN and PNP are listed as output options for the family. The information does not establish that a single sensor can switch between them.

Series technical data

The figures below are listed for the compact slot series. Match every value to the selected 45 or 67 Series ordering code and its current datasheet before final design.

Optical detection and response

Standard slot width5 mm
Listed minimum opaque target2 × 0.8 mm
Light sourceInfrared LED
Action / reset response1 ms maximum, as listed for the series

Power, output and switching

Supply voltage12–24 VDC ±10%; ripple less than 10% peak-to-peak
Current consumption17 mA maximum
Control output optionsNPN or PNP open collector; select the matching model
Listed maximum load current100 mA
Operation modeLight-ON / Dark-ON switching is listed; confirm availability and adjustment method for the selected model
Listed protectionReverse-polarity protection and surge absorption

Operating environment

Operating temperature−25 to +55 °C
Ambient illuminationFluorescent lamp: 1,000 lx maximum

Where compact slot detection can help

A slot sensor can provide a presence or passage signal when an opaque component crosses its opening. The listed small-target and 1 ms response values make this family worth evaluating where space is limited and parts move through a controlled path.

Examples include checking a small part as it passes a fixture, confirming position at an indexing point, or counting opaque pieces on a guided path. Suitability depends on the actual target, mounting geometry, throughput and selected output model; the series information does not establish a cleanroom rating or a guaranteed line speed.

Selection and installation checks

  • Confirm that the opaque target fully crosses the sensing zone within the 5 mm slot.
  • Choose the 45 or 67 Series housing and a pre-wired or plug-in connection that fits the machine.
  • Select the correct NPN or PNP model and check the controller input, supply and load current.
  • Verify whether Light-ON / Dark-ON switching is available on the exact model and how it is set.
  • Check the mounting drawing, wiring or connector pinout, ambient light and operating temperature for the selected part number.

Frequently asked questions

Is 5 mm the detection distance outside the sensor?

No. In this series information, 5 mm is the standard width of the U-shaped sensing slot. Check the target’s position as it passes through that opening.

What is the smallest object listed?

The series table lists a minimum opaque target of 2 × 0.8 mm. Confirm its test orientation and whether your actual part produces a reliable signal in the chosen setup.

Can one unit switch between NPN and PNP?

The family lists both output types, but does not state that one unit changes between them. Choose the correct ordering model for the controller input.

Are pre-wired and plug-in connections available?

The 67 Series is listed with both formats. Confirm the exact part number, cable or mating connector and pinout before ordering.

Does every variant have a 1 ms response?

The series table lists a maximum 1 ms action/reset response. Verify this rating on the current datasheet for the selected 45 or 67 Series model and your operating conditions.

Reviews

There are no reviews yet.

Be the first to review “XSZ compact slot type photoelectric sensor”

Your email address will not be published. Required fields are marked *