Professional Industrial Sensor Manufacturer
XSZ Sensor
Sensor Output Types for Your Control System

Match the sensor signal, switching behavior and electrical connection to your machine.

What Signal Does Your Machine Need?
  • Switching Signal

    A discrete detection state for presence or position decisions.

  • Analog Signal

    A changing value for supported measurement applications.

Four Details to Confirm
  • Output Circuit

    Select PNP or NPN output where supported, matched to your controller input.

  • Switching Function

    Choose NO or NC behavior to match your control logic.

  • Supply & Input Compatibility

    Confirm supply voltage and controller input requirements for reliable operation.

  • Cable & Connector

    Match wiring, connector pinout and installation to your machine design.

Available combinations depend on the sensor model and application.

Compare Output Configuration Directions
ConfigurationSignal PurposeConfirm Before Selection
PNP switching
Discrete detection state for presence or position decisions.Ensure your controller input supports PNP and the switching circuit is compatible.
NPN switching
Discrete detection state for presence or position decisions.Ensure your controller input supports NPN and the switching circuit is compatible.
Relay contact
Discrete detection state for presence or position decisions using a relay contact.Check the required contact rating and confirm the wiring is compatible with your application.
Analog signal
A changing value for supported measurement applications.Confirm your controller analog input and the required signal type are compatible.

Availability depends on the selected sensor family and model.

Output Circuit and Switching Function Are Different
PNP / NPN: Different Output Circuit

PNP or NPN is the electrical output arrangement matched to your controller input.

Sensor
PNP OutputNPN Output
Controller Input

Choose the matching output type; follow the model-specific wiring diagram.

NO / NC: Different Switching Behavior

NO or NC defines whether the output is ON or OFF when the detection condition is met.

NO
Target absentOutput OFFTarget detectedOutput ON
Normally openDetection condition met
NC
Target absentOutput ONTarget detectedOutput OFF
Normally closedDetection condition met

Proximity-sensor output-state examples, not voltage traces. Verify the selected model's operating mode.

When Output Customization Helps
  • Replace an Existing Sensor

    Match the controller input and connection to fit your current system.

  • Adapt to a New PLC

    Verify the output circuit and supply compatibility with your new controller.

  • Change the Machine's Logic

    Review the NO/NC setting and test the response in your application.

What to Send for an Output Review

Provide the following information so we can recommend the best output type for your application.

Current sensor model

Tell us the model you are using or considering.

PLC or controller model

Share the brand and model of your controller.

Input type and requirements

Specify PNP, NPN and any special input requirements.

Supply voltage

Provide the voltage used in your system.

Expected detection behavior

Describe when the output should turn on or off.

Current wiring diagram

Share your existing circuit diagram if available.

Cable or connector needs

Let us know your preferred cable type or connector style.

Estimated quantity

Tell us your expected order volume.

Model and controller documentation help confirm compatibility.

Confirm Compatibility Before Production

We review your requirements and recommend the most suitable output configuration.

  1. Review Electrical Requirements

    Check your sensor model, controller input and application details.

  2. Compare Available Models

    Compare output types and models with your requirements.

  3. Prepare a Sample

    Provide a sample for your evaluation if needed.

  4. Test with Your Controller

    Verify the sensor works in your actual system.

  5. Confirm the Final Specification

    Finalize the output type and model for production.

Output Type FAQs
How do I choose between PNP and NPN?
Check your controller's input requirements and existing circuit. PNP sources current; NPN sinks current. Confirm the sensor's wiring and switching function against the exact sensor and controller documentation.
Are PNP/NPN and NO/NC the same thing?
No. PNP and NPN describe the transistor output circuit. NO and NC describe the switching function: whether the output is active or inactive when the target is detected. Check both specifications, including light-on or dark-on operation where applicable.
Can I replace a three-wire sensor directly?
The same wire count does not guarantee compatibility. Compare supply voltage, PNP/NPN output, switching function, load rating, connector pin assignment and sensing requirements before replacement. Isolate power before wiring and test the selected model with your controller.
Can switching and analog signals be combined?
Only if the selected sensor supports the required outputs and your controller has compatible input channels. Share the required switching behavior, analog signal type and wiring arrangement. Available configurations must be confirmed for the exact model.
What information is needed for a custom output?
Provide the sensor and controller models, supply voltage, input requirements, expected switching behavior, wiring diagram, cable or connector needs and estimated quantity. These details help us review feasibility before confirming a specification.
How is the output verified with my PLC?
Check the model documentation and wiring first, then evaluate a suitable sample on the intended PLC input. Verify the detected and undetected states, signal timing and controller response under your actual operating conditions before approving the final specification.
Match the Sensor to Your Controller

Send us your current model and controller requirements for a technical review.

Discuss Your Output Type