LJC30A3-H-ZBX M30 20 mm Non-shielded Proximity Sensor

The XSZ LJC30A3-H-Z/BX is an M30 x 1.5 non-shielded proximity sensor with NPN normally open output and a listed 20 mm +/-10% sensing distance. The supplied non-shielded table also lists NPN NC, PNP NO, PNP NC, AC two-wire NO, and AC two-wire NC models. The drawing marks 70 mm and 60 mm length references, a 10 mm sensing-end reference, two clamp nuts, two buckle washers, and a red action display light. Confirm cable and wiring with XSZ before order.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

Description

LJC30A3-H-ZBX product overview

The XSZ LJC30A3-H-ZBX is the DC NPN normally open (NO) model in the supplied M30 non-shielded proximity-sensor range. Its listed 20 mm ±10% sensing distance is a target-sensing specification, while M30 describes the threaded body.

This model is intended for an installation that requires a non-shielded M30 sensor and an NPN NO input signal. Evaluate the actual target material, shape, approach direction and mounting environment against the current product data before committing to a detection point.

ModelLJC30A3-H-ZBX
Body / installationM30 × 1.5, non-shielded
Sensing distance20 mm ±10% (listed)
Electrical outputDC NPN, normally open

20 mm non-shielded sensing and target selection

The legacy specification gives a 20 mm ±10% sensing distance and a 0–18 mm setting distance. The setting range is the more practical reference when planning the installed gap; the nominal sensing figure alone does not establish reliable detection for every target.

Target material and geometry affect selection. Provide a representative part and the intended sensing gap when confirming the application; the listed distance does not establish the same response for every production material or part shape.

Technical specifications

The following figures are from the M30 non-shielded range specification. Confirm the current exact-model datasheet and drawing for final machine design.

Sensing and mechanical data

Product configurationM30 non-shielded proximity sensor
ThreadM30 × 1.5
Sensing distance20 mm ±10%
Setting distance0–18 mm
HysteresisLess than 10% of sensing distance
Action indicatorRed light, as identified in the supplied drawing

DC NPN NO electrical data

Output configurationDC NPN, normally open (NO)
Listed DC supply12–24 VDC; source also shows 6–36 VDC in parentheses
Consumption currentLess than 13 mA (source N.P. DC group)
Response frequency0.5 kHz (DC type)
Insulation resistanceAt least 50 MΩ at 500 VDC, between energized parts and housing

Environment and materials

Operating and storage temperature−30 to +65 °C; no freezing or condensation
Humidity35–95% RH
Protection classIP67
HousingNickel-plated brass
Sensing faceABS

Related M30 non-shielded models

The supplied range table lists the current NPN NO model alongside separate NPN NC, PNP and AC two-wire model codes. Those are distinct electrical versions, not settings that can be switched on this unit.

Electrical typeLogicLegacy model code
DC NPNNOLJC30A3-H-Z/BX — catalog notation for this model
DC NPNNCLJC30A3-H-Z/AX
DC PNPNOLJC30A3-H-Z/BY
DC PNPNCLJC30A3-H-Z/AY
AC two-wireNOLJC30A3-H-J/EZ
AC two-wireNCLJC30A3-H-J/DZ

Installation and selection checks

The source drawing describes an M30 × 1.5 threaded body with two clamp nuts, two buckle washers and a red action indicator. Obtain the current dimensional drawing to check sensing-face clearance, mounting position and cable exit before machining the bracket.

Confirm for your application

  • Target material, dimensions and actual gap within the listed 0–18 mm setting range.
  • DC supply and NPN NO input compatibility with the controller.
  • Required switching speed, cable/wiring arrangement and mounting clearance.
  • Temperature, moisture and other site conditions against the current datasheet.

Frequently asked questions

What does the 20 mm measurement mean?

It is the listed sensing distance, not the housing diameter. The separate body designation is M30, and the listed installation setting distance is 0–18 mm.

Is this the NPN normally open version?

Yes. The supplied range matrix maps the corresponding legacy code to the DC NPN NO selection. The other NPN, PNP and AC two-wire codes are different products.

Can I use the 20 mm figure for any target?

No universal target capability is established by the supplied data. Check the actual target material, size and mounting gap with a representative part.

What should be confirmed before wiring the sensor?

Confirm the current wiring diagram, supply range, controller input and allowable output load for this exact model. Cable and connector details were not specified in the supplied material.

Reviews

There are no reviews yet.

Be the first to review “LJC30A3-H-ZBX M30 20 mm Non-shielded Proximity Sensor”

Your email address will not be published. Required fields are marked *