E3Z-D61L 300 mm Photoelectric Sensor

The E3Z-D61L is a compact diffuse reflective photoelectric sensor with a source-listed 300 mm sensing distance. The supplied product text identifies a 10–30 VDC supply and four-wire NPN outputs providing normally open (NO) and normally closed (NC) signals. Its ABS body is listed at 32 × 12 × 21 mm. Because the sensing response can vary with the real target’s color, finish, size and angle, confirm the working distance and exact wiring before installation.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

Description

E3Z-D61L at a glance

The E3Z-D61L is a compact diffuse reflective photoelectric sensor with a source-listed 300 mm sensing distance. It detects light returned from the target, so the supplied installation description does not call for a separate reflector or receiver.

The model is listed with a 10–30 VDC supply and four-wire NPN normally open (NO) plus normally closed (NC) outputs. Both output signals belong to the listed E3Z-D61L configuration; use the exact wiring diagram to connect them to the intended controller.

Sensing methodDiffuse reflective
Sensing distance listed300 mm
OutputFour-wire NPN NO + NC
Body size32 × 12 × 21 mm

Diffuse detection without a separate reflector

A diffuse reflective sensor uses light returned by the object being detected. This keeps the sensing arrangement on one side of the target path, which can help when a separate reflector would be difficult to mount.

The stated 300 mm range should be checked with the actual object. Target color, surface finish, dimensions and approach angle can change the reflected signal; test the full expected variation at the planned mounting distance rather than assuming every target is detected at the nominal limit.

E3Z-D61L technical specifications

Optical and electrical data

ModelE3Z-D61L
Sensing methodDiffuse reflective
Sensing distance300 mm, as listed in the supplied product text
Supply voltage10–30 VDC
Output formatDC four-wire NPN
Output logicNormally open + normally closed (NO + NC)

Housing and application fit

Body size32 × 12 × 21 mm
Housing materialABS
Housing colorBlue

The supplied information does not specify response speed, output load, cable length, IP rating or operating temperature. Check the current model-specific datasheet and wiring drawing when those values affect selection.

Object detection in compact equipment

The narrow rectangular housing can be evaluated where a target passes a fixed sensing point—for example, a conveyor count, part-presence check or fixture-position check. Suitability depends on the actual target and machine conditions, not only the 300 mm nominal figure.

Before specifying E3Z-D61L

  • Test the smallest and least reflective expected target at the intended distance and angle.
  • Confirm the sensor’s mounting dimensions, available space and line-of-sight to the target.
  • Match the 10–30 VDC supply and NPN NO+NC signals to the controller using the exact wiring diagram.
  • Check cable, output-load, response-speed and environmental requirements against the current datasheet.

Frequently asked questions

Does E3Z-D61L require a reflector?

The supplied product description identifies it as diffuse reflective. It receives light returned from the target, so it does not specify a separate reflector for the detection path.

Are NO and NC both listed for this model?

Yes. The source describes a four-wire NPN configuration with normally open and normally closed output signals. Confirm conductor assignment with the exact wiring drawing.

Will every object be detected at 300 mm?

Not necessarily. Diffuse response depends on the actual object’s reflectivity, size and orientation. Verify the usable gap with the real target.

What must be checked before PLC connection?

Check the controller input type and the E3Z-D61L wiring diagram, including supply, NO/NC conductor assignment and permitted output load.