Description
E3F-DS100C4 product overview
The XSZ E3F-DS100C4 is a diffuse reflective photoelectric sensor with a DC three-wire NPN normally open (NO) output. It receives light returned from the object being detected, so its sensing method does not require a separate reflector.
The supplied product information lists a sensing distance of up to 100 cm (1 m). This is a source-listed maximum, not a promise that every target can be detected at that gap. Check the real object’s color, size, finish and approach angle when choosing a mounting position.
| Model | E3F-DS100C4 |
|---|---|
| Sensing method | Diffuse reflective |
| Listed maximum distance | 100 cm / 1 m, target-dependent |
| Output | DC three-wire, NPN NO |
Diffuse detection across a longer mounting gap
A single-sided diffuse arrangement can be useful where there is no convenient position for a separate reflector across a conveyor, chute or machine zone. The sensor must still receive enough light from the actual target for stable detection.
A dark, angled, glossy or small target may behave differently from a bright, larger one. Allow a practical margin within the listed maximum and evaluate the intended part at normal machine speed and lighting conditions.
Technical specifications
The available product information identifies the sensing method, listed distance, output and basic construction. Confirm the current exact-model datasheet before selecting the power supply or finalizing the mount.
Detection and output
| Sensor type | Photoelectric sensor |
|---|---|
| Sensing method | Diffuse reflective; no separate reflector |
| Source-listed distance | Up to 100 cm (1 m), depending on target conditions |
| Output configuration | DC three-wire, NPN normally open |
| Supply and wiring | Confirm exact operating voltage and current wiring diagram before connection |
Housing information
| Body style | Cylindrical |
|---|---|
| Housing material and color | ABS, orange |
| Listed weight | 55 g |
Applications and installation checks
This sensing method can be evaluated for object presence, arrival or counting at a conveyor or transfer point, provided the actual target returns sufficient light and the sensor meets the required switching speed. It may also be considered for packaging or fixture-position checks after a representative trial.
Confirm before ordering or wiring
- Target material, color, size, surface and angle at the intended gap.
- Required response at the machine’s normal target speed.
- Actual supply voltage, NPN NO controller input and conductor assignments.
- Current body drawing, mounting hardware, cable details and environmental rating.
Frequently asked questions
Does E3F-DS100C4 need a reflector?
No separate reflector is used for the stated diffuse reflective method. The target itself returns light to the sensor.
Will every target be detected at 1 m?
No. One meter is the listed maximum. Actual working distance depends on the target and installation; test the intended part with a suitable margin.
What output does this model use?
The supplied information identifies a DC three-wire NPN normally open output. Check the exact wiring diagram and controller input before connection.
Can the supply voltage be chosen from the old listing?
No. Confirm the exact operating-voltage rating from the current product label or datasheet before selecting a power supply or wiring the sensor.






