XSZ High-Speed RGB Color Mark Sensor

The XSZ CSM RGB color mark sensor is described as using a red, green and blue LED source to detect contrast between a taught mark and its background. The supplied CSM column lists a 10 mm ±3 mm sensing distance and 45 μs response. A shared CSM/KTM specification table lists 12–24 VDC supply, NPN open-collector output and selectable LIGHT-ON/DARK-ON action. Confirm that these figures and functions apply to the exact CSM model before publication or control-system design.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response
Category:

Description

RGB color mark sensor overview

The XSZ CSM color mark sensor uses a red, green and blue light source to distinguish a taught mark from its background by contrast. The CSM series is listed with a 10 mm ±3 mm sensing distance and a 45 μs response. Check the exact sensor model and actual printed or packaged material before setting the detection point.

The CSM series includes a SET-button teach function and LIGHT-ON/DARK-ON output options. The mark/background pair, surface finish, sensor angle and line speed determine whether the signal is suitable for a particular machine.

SeriesCSM RGB
Listed sensing distance10 mm ±3 mm
Listed CSM response45 μs
Control outputNPN open collector

Detecting a registration mark against its background

RGB illumination gives the teach function different color channels to evaluate for a mark/background pair. That can help when the available contrast changes with ink, film or label stock, but the result should be checked on the real material rather than inferred from the color names alone.

For reliable mark recognition, verify the mark width, printed contrast, surface gloss, sensing distance and repeatability at operating speed. A 45 μs listed response is only one part of that check; it does not establish zero lag or a guaranteed maximum line speed.

Technical specifications

The following figures describe the CSM RGB series. Confirm the exact model’s rated values and wiring before electrical installation.

CSM RGB sensing data

Light sourceRGB three-color, 4-element LED
Sensing distance10 mm ±3 mm
Response time, CSM series45 μs; confirm measurement conditions for the selected model

Electrical and output data

Supply voltage12–24 VDC ±10%; ripple peak-to-peak 10% maximum
Current consumption20 mA maximum
Control outputNPN open collector; listed inflow current 100 mA maximum
Residual voltageLess than 1 V
Output actionLIGHT-ON / DARK-ON; verify configuration for the selected model
Listed protection circuitsReverse supply polarity, overcurrent and overvoltage

Environment and indicators

Operating temperature−10 to +55 °C
Protection degreeIP67 (IEC), as listed
IndicatorsOrange operation; green stability
AdjustmentSET-button teach function; confirm the exact procedure

Installation and material checks

Packaging and print registration

A color mark sensor can be evaluated for registration marks on printed packaging, labels or moving web material. Test the actual ink/substrate pair, mark dimensions and repeat rate on the machine before treating it as a registration or sorting control point.

Before electrical integration

Confirm the exact CSM code, mounting drawing, sensing orientation, wiring colors, NPN load and LIGHT-ON/DARK-ON setting. Use the matching model’s wiring diagram before connecting the output.

Information to prepare for model selection

  • Mark color, background color, finish and substrate material.
  • Mark width, sensing gap and expected web or conveyor speed.
  • Required output action, controller input and supply voltage.
  • Mounting space, cable/connector and operating environment.

Frequently asked questions

Is the 45 μs response value for the RGB series?

The listed 45 μs figure applies to the CSM RGB series. Confirm the selected model’s response conditions before calculating line speed.

Does RGB illumination guarantee detection of similar colors?

No universal contrast result is established. Teach and test the actual mark and background under normal lighting and material movement.

What output is specified for the CSM RGB series?

The listed output is NPN open collector with LIGHT-ON/DARK-ON action. Confirm the actual model’s wiring and output-mode configuration before connecting it to a controller.

What is needed to confirm a suitable sensor?

Provide the mark and background samples, sensing distance, line speed, output requirement and the available mounting space.

Reviews

There are no reviews yet.

Be the first to review “XSZ High-Speed RGB Color Mark Sensor”

Your email address will not be published. Required fields are marked *