Y-Type Slot Photo Sensor

The XSZ EUSL-U30-Y series is a Y-type slot photo sensor with a source-listed 30 mm opening and two optical axes for opaque-target detection. The supplied model list pairs EUSL-U30R3C4-Y with NPN output and EUSL-U30X3C4-Y with PNP output. Both are described with a 10–30 V DC supply, Light-ON/Dark-ON selection by control wire and a 2 m pre-wired cable. Confirm the selected model’s drawing, wiring and target test conditions before integration.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response
Category:

Description

EUSL-U30-Y detection at a fixed 30 mm slot

The XSZ EUSL-U30-Y series is a Y-type slot photo sensor for detecting an opaque target as it passes through a fixed opening. Its supplied specifications list a 30 mm gap and two optical axes with separate A/B signals. The angled housing offers an alternative mounting layout where the target path, bracket and cable route suit the machine.

The 30 mm figure describes the slot opening, not a remote sensing distance. Check the target’s movement through the slot and its position relative to both optical axes before choosing a model.

Two output versions in the EUSL-U30-Y series

The supplied model list distinguishes NPN and PNP versions. Select the version that matches the controller input; the output type is not presented as a field-switchable setting.

Model codeListed outputSelection check
EUSL-U30R3C4-YNPN open collectorVerify the NPN wiring diagram and controller input.
EUSL-U30X3C4-YPNP open collectorVerify the PNP wiring diagram and controller input.

Optical, electrical and housing specifications

These are series-level values in the supplied description. Confirm them against the selected NPN or PNP model before finalizing the machine interface.

Detection and optical signals

Slot opening30 mm
Optical axes2, described as independent A/B channels
Listed detectable targetOpaque object above Ø12 mm; confirm shape and test conditions
Response time1 ms maximum, as listed for the series

Electrical interface and construction

Supply voltage10–30 V DC; supply ripple 10% maximum, peak-to-peak
Maximum load current100 mA
Operating logicLight-ON / Dark-ON, listed as selectable by control wire; verify the wiring for the chosen model
CablePre-wired, 2 m
Housing and lensABS case; PC lens
Ambient-light referenceSunlight up to 10,000 lx in the supplied specification; test conditions not provided

The old description lists a green power/circuit indicator and red/yellow A/B output indicators. Confirm the indicator behavior on the selected unit and its current manual.

Fit the Y-type housing to the actual detection point

This series can be evaluated for opaque tabs, flags or parts passing through a guided slot in assembly and material-handling equipment. The two optical axes may provide separate position signals, but the application must be checked with the smallest target, its travel path and the controller’s input timing. It is not specified here as a personnel-safety device.

Before selecting a version

  • Check the target’s opaque area, shape, orientation and clearance through the 30 mm opening.
  • Match the Y-type body, fixing holes and 2 m cable exit to the available mounting space.
  • Choose the NPN or PNP model for the controller and confirm the Light-ON/Dark-ON control-wire connection.
  • Test the shortest target and gap at operating speed, including nearby light and dust conditions.

Frequently asked questions

Is 30 mm the sensing distance?

No. The supplied figure describes the slot opening. The target must pass through the specified optical path inside the housing.

Which version should I use with an NPN input?

The supplied model list identifies EUSL-U30R3C4-Y as the NPN version and EUSL-U30X3C4-Y as PNP. Verify the chosen model’s wiring against your controller before connecting it.

Can it detect a transparent label or an object exactly 12 mm across?

Neither is established by the supplied specification. It lists an opaque target above Ø12 mm, without a full target test method. Test the actual material and dimensions.

What do I need before installing the two-channel output?

Obtain the model-matched wiring diagram, optical-axis positions and control-wire instructions. Check both channel signals at the controller with the real moving target.