Description
SZ Series M18 product overview
The XSZ SZ Series M18 covers cylindrical photoelectric sensors in diffuse-reflective, retro-reflective and through-beam configurations. The available series information lists an M18 threaded housing and DC-powered NPN or PNP output options.
Detection mode, sensing range, light source, housing material and output must be selected for an exact orderable model. The series data does not identify a single sensor that combines every listed option.
Three model-dependent sensing configurations
The following distances are ranges listed for the series, not a promise that every M18 sensor reaches the upper value. Confirm the exact model, target and installation conditions before selecting a sensing distance.
| Sensing configuration | Listed range | Selection note |
|---|---|---|
| Diffuse-reflective | 10 cm–1 m | Confirm target and exact model |
| Retro-reflective | 2–3 m | Confirm setup and exact model |
| Through-beam | 5–20 m | Confirm paired components and exact model |
Series-listed technical specifications
These are values from the available series description. Confirm which values apply to the chosen part number using its current datasheet and wiring diagram.
Housing and optical options
| Housing form | M18 threaded cylinder; full dimensions to confirm |
|---|---|
| Housing material options | Plastic or brass/metal, depending on model |
| Sensing configurations | Diffuse-reflective, retro-reflective or through-beam |
| Light-source options | Infrared LED or visible-red LED, depending on model |
Supply, output and response
| Supply notation | DC 10–30 V ±10%; confirm the interpretation of the tolerance |
|---|---|
| Supply ripple | Less than 10% peak-to-peak |
| Control-output options | NPN or PNP open collector; NO or NC, depending on model |
| Load current | Maximum 200 mA, subject to model confirmation |
| Response time | Maximum 2 ms under the listed standard-operation condition; verify for the selected model |
Protection and environment
| Listed circuit protection | Reverse-polarity and output short-circuit protection |
|---|---|
| Operating temperature | −25 to +55 °C |
| Protection degree | IP67 as listed for the series; confirm the selected model and installation conditions |
Applications and installation checks
An M18 photoelectric sensor can be evaluated for object-presence checks on conveyors, packaging equipment or assembly stations when the selected sensing mode, target and range fit the process. The source does not identify a single variant validated for every listed application.
Before selecting a model
- Choose diffuse, retro-reflective or through-beam sensing for the actual target and layout.
- Confirm the exact model’s working distance, light source, output type, NO/NC logic and supply.
- Check M18 body length, mounting clearance, housing material, cable or connector and wiring.
- Use a wiring diagram approved for that exact model; a generic NPN/PNP diagram does not establish every variant’s connections.
Frequently asked questions
Does one SZ Series M18 sensor support all three sensing modes?
The supplied information presents diffuse, retro-reflective and through-beam as series configurations. Confirm the mode of the exact model being ordered.
What sensing distance should I use for selection?
The listed ranges differ by mode and are model-dependent. Request the selected model’s rated range and test it with the intended target and setup.
Are both NPN and PNP outputs available?
Both are listed as series options, along with NO and NC logic. They are not confirmed as switchable functions of one sensor; use the exact model code and wiring diagram.
What should be confirmed before ordering?
Provide the target, required detection distance, sensing arrangement, controller input, mounting space, housing preference and cable requirements so the correct model can be identified.




