EZ Series Diffuse Reflection Strip Photoelectric Sensor

The EZ Series Diffuse Reflection Strip Photoelectric Sensor is specifically engineered toovercome the challenges of detecting complex, irregular, or hollow objects in industrialautomation. Featuring a unique strip light design with a stable 5 x 30 mm detection spot,this sensor ensures reliable performance where standard point-source sensors might fail, suchas on mesh, perforated materials, or concave-convex surfaces.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response
Category:

Description

EZ Series strip sensor overview

The XSZ EZ Series is a slim strip-format diffuse reflective photoelectric sensor family for detecting object presence where a narrow mounting profile is useful. The sensor receives light reflected from the target, so the application does not require a separate reflector.

The supplied series brief lists alternative sensing distances, light sources and output types. The exact combination belongs to the selected EZ model; the options below should not be read as settings available on every unit.

Diffuse detection in a narrow mounting space

A diffuse reflective sensor uses light returned from the object itself. This simplifies stations where placing and aligning a separate reflector across the sensing path would be impractical. The strip format may fit into machine frames, narrow trays and other constrained mounting positions.

Detection should be checked with the real part at its intended distance and angle. Target colour, surface finish, size and surrounding light can affect a diffuse reflective setup; the supplied brief does not define a standard target or measurement conditions for its distance options.

Series specifications and selection options

These figures and choices come from the supplied EZ Series brief. It does not link them to individual model codes. Confirm the exact specification sheet for the selected sensor before finalizing a machine design.

Optical and physical characteristics

Sensing methodDiffuse reflective
Detection-distance options100 mm or 300 mm, as listed in the series brief; confirm model and test target
Sensitivity adjustmentPotentiometer adjustment listed; confirm the range and model
Light-source optionsInfrared LED or red LED; confirm the selected model
Housing materialPC / ABS polymer, as listed for the series; confirm model-specific construction

Electrical and response data

Supply voltage12–24 VDC ±10%, as listed for the series
Supply ripple10% peak to peak maximum, as listed
Output optionsNPN or PNP open collector; normally open (NO) or normally closed (NC) options. Confirm the model code for the required combination.
Listed output current100 mA maximum; verify for the selected model
Listed response time1 ms maximum; verify model and measurement conditions
Protection circuitsReverse-polarity and output short-circuit protection listed; verify coverage for the selected model

Choosing an EZ Series configuration

The brief gives no individual EZ model numbers or option matrix. Select a specific sensor only after confirming the following combination in the current datasheet:

  • Required 100 mm or 300 mm distance option against the real target and its surface.
  • Infrared or red LED version, if both are offered for the intended distance.
  • NPN or PNP output and the required NO or NC logic for the controller.
  • Physical dimensions, mounting holes, cable/connector and wiring diagram for the exact model.
  • Documented ingress-protection grade and operating environment for the selected unit.

Applications and installation checks

Potential uses include object-presence detection on a conveyor or checking the position of a board or part in a compact fixture. In each case, the target should be tested at the intended gap and presentation angle, especially when colour or reflectivity varies between parts.

Allow room to access any adjustment control and route the cable without stressing the housing. Use the wiring diagram for the chosen NPN or PNP model; the legacy diagram is not enough to identify a particular EZ code or wire assignment.

Frequently asked questions

Does an EZ diffuse reflective sensor need a separate reflector?

No. This sensing method receives light returned from the target itself. Detection still needs to be checked with the real object’s surface and position.

Is every EZ sensor adjustable from 100 mm to 300 mm?

The supplied brief lists 100 mm and 300 mm distance options and mentions potentiometer adjustment, but does not map either range to a model. Do not assume one unit covers both distances; check the selected code.

Can one EZ unit switch between NPN and PNP or between NO and NC?

That is not established by the supplied material. It lists NPN/PNP and NO/NC as series options without model mapping. Confirm the required output and logic before ordering.

What information is needed to choose a model?

Provide the target material and surface, detection gap, available mounting space, controller input type and the required wiring/connection format. Match these to the current EZ model datasheet.