Description
M18 retro-reflective detection
E3FA-RN12 at a glance
The E3FA-RN12 is a retro-reflective photoelectric sensor with a separate reflector. It sends light toward the reflector and detects an object when that object interrupts the returned light path. Its listed sensing range is 0–500 mm, with an NPN output and an M18 threaded body.
This arrangement suits a defined crossing point where the sensor and reflector can face each other. The usable distance depends on the selected reflector, alignment and actual target; verify the complete setup on the machine.
How the E3FA-RN12 detects an object
Install the sensor on one side of the detection path and a suitable reflector opposite it. With the path clear, light returns to the sensor. A passing object interrupts that return path, allowing the output to signal a detection event to a compatible control system.
Plan enough space for both components and align them at the intended working distance. Small, transparent or highly reflective targets should be checked in the real installation rather than assumed to behave like an opaque reference object.
E3FA-RN12 technical specifications
| Model | E3FA-RN12 |
|---|---|
| Sensor type | Photoelectric sensor |
| Sensing method | Retro-reflective; separate reflector required |
| Listed sensing range | 0–500 mm |
| Output type | NPN; switching state and wiring to be confirmed for the exact unit |
| Housing / color | ABS / black |
| Mounting form | M18 threaded cylindrical body |
| Listed body-size notation | M18 × 41 × 34.5 mm; confirm the dimensional drawing for exact feature positions |
Where a reflector-based sensor can fit
The E3FA-RN12 can be evaluated for short detection points where a passing item breaks a fixed beam. Suitability still depends on the actual item, path geometry and machine timing.
Conveyor transfer
Check whether a carton, tray or part crosses the sensor-to-reflector path at the handoff point.
Packaging equipment
Use a defined beam position to evaluate product presence before a downstream operation.
Compact machine fixtures
Check for a carrier or workpiece reaching a repeatable position when both sensor and reflector can be mounted securely.
Selection and installation checks
- Choose a compatible reflector and confirm whether it is supplied separately.
- Place the target across the beam and test its smallest expected size, speed, surface and normal travel position.
- Check the exact NPN wiring and switching state against the controller input before connecting power.
- Confirm supply voltage, cable or connector, output load, environmental rating and the dimensional drawing for the exact orderable unit.
Frequently asked questions
Does E3FA-RN12 need a reflector?
Yes. The supplied product information identifies it as retro-reflective and specifies a separate reflector. Check the compatible reflector for the intended distance.
Is 500 mm a guaranteed distance for every target?
No. 0–500 mm is the listed range. Reflector choice, alignment and the object crossing the light path determine the usable setup.
What should be checked before connecting it to a PLC?
Verify the exact unit’s supply rating, wire assignment, NPN switching state and output load against the PLC input and wiring diagram.






