Description
SZ-GY Series product overview
The XSZ SZ-GY Series is a square-format photoelectric sensor family for longer-distance object-presence checks in industrial equipment. The family includes diffuse reflective, retro-reflective and through-beam configurations.
These optical arrangements require different installation layouts. Available range, output and wiring depend on the selected SZ-GY model, so choose the exact configuration for the sensing point.
Choose the optical arrangement first
The sensing mode determines what must be installed opposite or near the sensor and how the target interrupts or returns the light. Select the arrangement around the actual detection point rather than comparing distance figures alone.
| Series-listed mode | Installation consideration |
|---|---|
| Diffuse reflective | The target returns light to the sensor. Check the real object’s surface, size and background at the required distance. |
| Retro-reflective | A compatible reflector is placed across the detection path. Confirm reflector type, spacing and alignment for the exact model. |
| Through-beam | Separate emitter and receiver units are aligned across the path. Confirm the correct pair, supply and mounting positions. |
Series options to match to a model
SZ-GY configurations differ by sensing mode and electrical design. Match the choices below to an exact part number, then use that model’s current datasheet for rated sensing distance and electrical limits.
| Housing format | Square / rectangular format; confirm exact dimensions and mounting holes |
|---|---|
| Sensing-mode choices | Diffuse reflective, retro-reflective or through-beam; confirm model code |
| Light-source choices | Infrared or visible-red LED; confirm the selected model |
| Output choices | NPN/PNP open collector or relay; confirm the matching supply and wiring |
| Output logic | Check whether Light-ON / Dark-ON selection is available on the chosen model |
Sensing distance varies by model and test arrangement. Use the rated distance for the exact unit, target or reflector, rather than a general range for the entire series.
Application and installation checks
A long-distance optical sensing point may be useful for checking object presence across a conveyor or a wider machine opening when the selected model’s rated range supports that geometry. Verify detection with the actual object, background, spacing and operating speed.
Before specifying an SZ-GY unit
- Confirm the exact model and sensing mode, including any required reflector or emitter/receiver partner.
- Check the rated distance under the supplier’s stated target or reflector conditions—not only the width of the machine.
- Match the approved voltage, NPN/PNP or relay output, Light-ON/Dark-ON behavior and wiring to the controller.
- Check the dimensional drawing, alignment access and cable/connector route.
- Obtain the selected model’s documented temperature and ingress ratings for any dusty, wet or outdoor exposure.
Frequently asked questions
Is every SZ-GY sensor both diffuse and through-beam?
No such interchangeability should be assumed. Select a model with the sensing arrangement required for the installation.
How should the required sensing distance be chosen?
Start with the real span, target or reflector, alignment conditions and operating environment. Then compare them with the rated distance in the selected model’s datasheet.
Are NPN, PNP and relay outputs interchangeable on one unit?
Do not assume they are. Choose the electrical version and matching wiring required by the controller.
Can this sensor be used for personnel or vehicle collision protection?
No safety-function rating is provided here. Such uses require a separate safety assessment and appropriately rated equipment.




