SZ-M137-105DN 105 mm Ring Proximity Sensor, NPN NO

XSZ SZ-M137-105DN is a ring proximity sensor for in-ring detection through a 105 mm detection hole. The source-listed 105 mm selection includes NPN, PNP, and DC NO/NC model options. The source drawing shows a 137 x 115.5 x 54 mm housing with four 8.8 mm mounting holes. Confirm response time, cable, wiring, and target conditions with XSZ before order.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

Description

SZ-M137-105DN product overview

The XSZ SZ-M137-105DN is a ring proximity sensor for detecting metal targets as they pass through a 105 mm opening. This specific model has an NPN normally open (NO) output and operates from a 10–30 VDC supply.

The pass-through format can be considered for metal-part passage detection, parts-counting stations and automated material-handling equipment when the target and operating conditions match the installation.

ModelSZ-M137-105DN
Detection opening105 mm
OutputNPN NO
Supply10–30 VDC

105 mm ring detection for metal parts

Use the 105 mm opening when the part and its travel path can pass through the ring with suitable clearance. The sensor is specified for metal targets; target geometry, orientation and movement should be checked against the required detection result.

Check that the controller input is compatible with an NPN normally open signal. The listed 2 m cable, housing size and mounting-hole dimensions also need to fit the planned location. Obtain the wiring diagram and confirm response time for the intended application.

Technical specifications

Review the electrical, mechanical and environmental values together before selecting the sensor. Confirm the current specification and drawing for SZ-M137-105DN when making a purchase or machine-design decision.

Product type and mechanical dimensions

Sensor typeProximity sensor
Product typeRing proximity sensor
Detection methodIn-ring detection
Detectable targetMetal
Detection-hole diameter105 mm
Housing dimensions137 × 115.5 × 54 mm
Mounting holes4 × Ø8.8 mm

Electrical specifications

Output configurationNPN, normally open (NO)
Operating voltage10–30 VDC
Control input200 mA
Control output200 mA
Consumption currentLess than 10 mA
Residual voltageLess than 2.5 V

Detection performance

Hysteresis1–5%
Sensing line speed50–3000 m/min
Repeat accuracyLess than 3%
Response timeConfirm with XSZ for the intended application

Environmental and construction details

Working temperature−25 to +70 °C
Storage temperature−40 to +85 °C
Protection classIP67
Housing materialPBT / ABS
IndicatorRed LED
Cable length2 m
Circuit protectionShort-circuit protection and polarity protection

Related 105 mm ring proximity sensor models

SZ-M137-105DN is the NPN NO product on this page. The other part numbers below are separate 105 mm selections, not switchable operating modes of this unit.

Output typeLogicModel
NPNNOSZ-M137-105DN — this product
NPNNCSZ-M137-105DN2
PNPNOSZ-M137-105DP
PNPNCSZ-M137-105DP2
DCNOSZ-M137-105DO
DCNCSZ-M137-105DC

Confirm the wiring and output definition of any alternative model before ordering, especially the configurations labeled “DC”.

Applications and installation checks

Typical applications

  • Detecting a metal part as it travels through a circular opening.
  • Providing a passage signal for a parts-counting station, subject to controller and timing checks.
  • Monitoring metal-part movement in automated material-handling equipment.

What to confirm before ordering

  • Target material, size and position within the 105 mm opening.
  • Required line speed, detection timing and controller input type.
  • Mounting clearance for the housing and four Ø8.8 mm holes.
  • Supply, NPN NO wiring, cable route and operating environment.

Frequently asked questions

What does the 105 mm dimension describe?

It is the detection-hole diameter, not the outside width of the housing. The housing dimensions listed for this selection are 137 × 115.5 × 54 mm.

Is SZ-M137-105DN an NPN normally open sensor?

Yes. SZ-M137-105DN is the NPN NO selection in the 105 mm range. Check the approved wiring diagram before connecting it to a controller.

Can it be used for counting fast-moving metal parts?

It may be evaluated for a counting station, but response time must be confirmed for the required throughput. Share the part geometry, travel speed and required timing with XSZ before selecting the sensor.

What information is needed to confirm the correct model?

Send the target material and dimensions, the path through the opening, line speed, supply voltage, controller input requirement and mounting or wiring drawing if available.