PR08-2DN M8 2 mm Non-shielded Proximity Sensor

The XSZ PR08-2DN is an M8 non-shielded DC proximity sensor with NPN normally open output, a 2 mm +/-10% sensing distance, 35 mm body-length reference, and 5 mm sensing-face diameter. The non-shielded M8 series also lists NPN, PNP, and DC two-wire output choices. Confirm target material, supply voltage, cable, and wiring with XSZ before order.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

Description

PR08-2DN product overview

The XSZ PR08-2DN is an M8 non-shielded proximity sensor for a close-range metal detection point. Its model code identifies the DC NPN normally open version in the PR08 range; the listed sensing distance is 2 mm ±10%.

The separate setting-distance range is 0–1.6 mm. Both figures should be considered with the specified 12 × 12 × 1 mm iron reference target rather than assumed for every part or mounting position.

ModelPR08-2DN
Housing / mountingM8 / non-shielded
Sensing / setting distance2 mm ±10% / 0–1.6 mm
OutputDC NPN, normally open

Plan the operating gap around the actual metal target

The listed 2 mm sensing distance is based on an iron target measuring 12 × 12 × 1 mm. For a small or differently shaped metal part, confirm the usable gap with the real target and approach direction at the intended machine position.

PR08-2DN is non-shielded, so the surrounding metal and mounting clearance matter. Check the current installation drawing before designing a bracket or recess around its sensing face.

PR08-2DN technical specifications

These values describe the listed M8 non-shielded DC NPN normally open version. Confirm wiring and mounting against the supplied unit’s current documentation.

Detection and mounting

Thread size / installationM8 / non-shielded
Sensing distance2 mm ±10%
Setting distance0–1.6 mm
Standard targetIron, 12 × 12 × 1 mm
Detectable targetMetal (iron reference)
HysteresisLess than 10% of sensing distance

Electrical data

Output configurationDC NPN, normally open (NO)
Listed DC supply10–30 VDC
Consumption currentLess than 13 mA (N/P output group)
Insulation resistanceAt least 50 MΩ at 500 VDC, between live parts and housing

Environment and construction

Operating and storage temperature−30 to +65 °C; no freezing or condensation
Humidity35–95% RH
Protection classIP67
Housing materialNickel-plated brass
Sensing-face materialABS

Related PR08 non-shielded model codes

PR08-2DN is the DC NPN normally open product on this page. The codes below identify separate electrical or switching-logic versions, not settings that can be changed on this unit.

Electrical typeLogicModel code
DC NPNNOPR08-2DN — this product
DC NPNNCPR08-2DN2
DC PNPNOPR08-2DP
DC PNPNCPR08-2DP2
DC two-wireNOPR08-2DO
DC two-wireNCPR08-2DC

Applications and installation checks

The M8 body can be evaluated for metal-part presence or position checks at a compact machine fixture. Test the actual part at the intended operating gap, and check that nearby metal does not interfere with the required non-shielded mounting arrangement.

Confirm before ordering

  • Actual target material, size and travel path at the planned 0–1.6 mm setting distance.
  • Non-shielded mounting clearance and the current mechanical drawing.
  • 10–30 VDC supply and NPN NO compatibility with the controller input.
  • Cable or connector type, wiring diagram and permissible output load for the unit supplied.

Frequently asked questions

Is PR08-2DN a non-shielded model?

Yes. The supplied model table identifies PR08-2DN as M8 non-shielded. Confirm the metal-free clearance around the sensing face using the current mounting drawing.

What is the difference between sensing and setting distance?

The listed sensing distance is 2 mm ±10%. The separate 0–1.6 mm setting distance is the range to use when planning a reliable target gap.

Will every metal target be detected at 2 mm?

Not necessarily. The listed reference target is iron measuring 12 × 12 × 1 mm. Check the real metal, shape and size at the planned gap.

Can I use a PNP or two-wire output with this part number?

No. PR08-2DN is the NPN normally open code. PNP and DC two-wire choices have separate model codes and require their own electrical checks.

Reviews

There are no reviews yet.

Be the first to review “PR08-2DN M8 2 mm Non-shielded Proximity Sensor”

Your email address will not be published. Required fields are marked *