SZ-M80-36DN 36 mm Ring Proximity Sensor, NPN NO

The XSZ SZ-M80-36DN is a ring proximity sensor for detecting metal parts passing through a 36 mm opening. It is the NPN normally open (NO) model in the supplied 36 mm series matrix, with a listed 10–30 VDC operating range. The supplied specification also lists four Ø5.0 mm mounting holes, a 2 m cable and IP67 protection. Confirm the housing-drawing units, target conditions, controller wiring and required detection timing before ordering.

  • Factory Direct SupplyStable Quality
  • Custom OptionsSupport OEM/ODM
  • Technical SupportQuick Response

Description

SZ-M80-36DN product overview

The XSZ SZ-M80-36DN is a ring proximity sensor for detecting metal parts passing through a 36 mm opening. It is the NPN normally open (NO) selection in the 36 mm series and has a listed 10–30 VDC operating range.

The opening size, target path and controller input are the first selection checks. The technical data below also covers mounting, cable and operating conditions so the sensor can be evaluated for a specific machine rather than by opening diameter alone.

ModelSZ-M80-36DN
Detection opening36 mm
OutputNPN NO
Operating voltage10–30 VDC

36 mm ring detection for metal parts

The 36 mm figure describes the detection-hole diameter, not the outside dimensions of the housing. Position the metal part so its normal travel path passes through the ring, while allowing clearance for the part, any surrounding tooling and the mounting arrangement.

For passage monitoring or counting, confirm the target material, size, orientation and movement against the required detection result. The response-time and line-speed entries need confirmation before this model is specified for a particular throughput.

Technical specifications

Review the mechanical, electrical and environmental values together. Check the current SZ-M80-36DN datasheet and dimensional drawing before finalizing the controller connection or mounting design.

Sensing format and mechanical dimensions

Sensor typeProximity sensor
Product typeRing proximity sensor
Detection methodIn-ring detection
Detectable targetMetal
Detection-hole diameter36 mm
Housing drawing dimensions80 × 65 × 40; drawing unit to confirm
Mounting holes4 × Ø5.0 mm

Electrical specifications

Output configurationNPN, normally open (NO)
Operating voltage10–30 VDC
Control input200 mA
Control output200 mA
Consumption currentLess than 10 mA
Residual voltageLess than 2.5 V

Detection performance

Hysteresis1–5%
Sensing line speedApplicable value to confirm with XSZ
Repeat accuracyLess than 3%
Response timeValue and unit to confirm with XSZ

Environmental and construction details

Working temperature−25 to +70 °C
Storage temperature−40 to +85 °C
Protection classIP67
Housing materialPBT / ABS
IndicatorRed LED
Cable length2 m
Circuit protectionShort-circuit protection and polarity protection

Related 36 mm ring proximity sensor models

This page describes SZ-M80-36DN, the NPN NO version. The other listed part numbers are separate 36 mm selections, not output settings on the same sensor.

Output typeLogicModel
NPNNOSZ-M80-36DN — this product
NPNNCSZ-M80-36DN2
PNPNOSZ-M80-36DP
PNPNCSZ-M80-36DP2
DCNOSZ-M80-36DO
DCNCSZ-M80-36DC

For another output configuration, confirm the matching model code and wiring diagram before ordering.

Applications and installation checks

Typical applications

  • Detecting a metal part as it travels through a circular opening.
  • Providing a passage signal to a parts-counting station after target and timing checks.
  • Monitoring metal-part movement in automated material-handling equipment.

Installation considerations

Check the current housing drawing for outside dimensions and units before designing the mounting plate. Allow for four Ø5.0 mm mounting holes, the 2 m cable route, and enough clearance around the 36 mm opening for the moving part and nearby tooling.

What to confirm before ordering

  • Metal target material, size and path through the 36 mm opening.
  • Required line speed, response time and controller input type.
  • Drawing units, mounting clearance and cable routing.
  • 10–30 VDC supply, NPN NO wiring and operating environment.

Frequently asked questions

What does the 36 mm dimension describe?

It is the diameter of the detection opening, not the outside width of the sensor. Check the current housing drawing for the outside dimensions and their units.

Is SZ-M80-36DN the NPN normally open model?

Yes. SZ-M80-36DN is the NPN NO selection among the listed 36 mm models. Confirm the wiring diagram before connecting it to a controller.

Can it be used for counting moving metal parts?

It may be evaluated for a counting station when the target passes through the opening. Confirm the applicable line-speed and response-time values for the actual part and throughput before selection.

What information helps confirm the correct model?

Provide the target material and dimensions, its path through the ring, required timing, supply voltage, controller input type and any mounting or wiring drawing.

Reviews

There are no reviews yet.

Be the first to review “SZ-M80-36DN 36 mm Ring Proximity Sensor, NPN NO”

Your email address will not be published. Required fields are marked *