SZ-M8-1DN M8 1 mm Flush Mount Proximity Sensor

The XSZ SZ-M8-1DN is an M8 flush-mount proximity sensor with a 1 mm sensing distance and DC NPN normally open output. Its legacy specification uses an 8 × 8 × 1 mm iron reference target and lists an 8 mm diameter, 45 mm body length, 800 Hz response frequency and 0.1 ms response time. Check the actual target material, mounting clearance, supply and wiring for the installation.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

Description

M8 flush-mount proximity sensor

Close-range metal detection in an M8 body

The XSZ SZ-M8-1DN is the 1 mm, DC NPN normally open model in the M8 flush-mount range. Its compact 8 mm-diameter body is intended for installations where sensor space and the target gap are limited. The 1 mm sensing specification is based on an 8 × 8 × 1 mm iron reference target; target size, material and mounting conditions matter when selecting the working gap.

M8 flush mount
1 mm iron-reference sensing
DC NPN NO

What this model is designed to detect

The specified sensing distance is 1 mm with an iron target measuring 8 × 8 × 1 mm. The legacy specification identifies magnetic metal as the detectable target and notes a reduced detection distance for non-magnetic metal. A smaller, thinner or differently shaped part can also require application testing rather than relying on the nominal 1 mm figure alone.

The NPN normally open output is the electrical configuration of SZ-M8-1DN. A normally closed or PNP requirement calls for a different model code; this sensor does not switch between output types.

SZ-M8-1DN technical specifications

Model / mountingSZ-M8-1DN / M8 flush mount
OutputDC NPN, normally open (NO)
Sensing distance1 mm, referenced to the standard iron target
Standard targetIron, 8 × 8 × 1 mm
Detectable materialMagnetic metal; shorter distance with non-magnetic metal
Response frequency800 Hz, listed value
Response time0.1 ms, listed value
HysteresisLess than 10% of sensing distance
Body dimensions8 mm diameter × 45 mm body length
Current consumptionLess than 13 mA, listed N/P-type value
Circuit protectionReverse-connection protection, surge absorption and load short-circuit protection, listed for N/P/D types
Operating / storage conditions−30 to +65 °C; no freezing or condensation; 35–95% RH
MaterialsNickel-plated brass housing; ABS sensing face
Insulation resistanceAt least 50 MΩ at 500 VDC, between live parts and housing
Dielectric withstand1000 VAC, 50/60 Hz for 1 minute, between live parts and housing

Confirm the supply voltage, electrical connection, rated output load and ingress-protection rating for the exact delivered version before wiring. These values are not specified in the available model information.

Choosing the correct M8 version

SZ-M8-1DN is specifically the 1 mm NPN NO code. The related codes below identify different products, not field-selectable settings on SZ-M8-1DN.

RequirementListed model
1 mm, NPN normally openSZ-M8-1DN
1 mm, NPN normally closedSZ-M8-1DN2
1 mm, PNP normally openSZ-M8-1DP
2 mm, NPN normally openSZ-M8P-2DN
3 mm, NPN normally openSZ-M8P-3DN

Check the actual controller input and required target gap before selecting a code. The 2 mm and 3 mm entries have different standard target references and are not interchangeable specifications for the 1 mm unit.

Installation and application checks

  • Match the NPN normally open signal to the receiving PLC or controller input.
  • Allow for the actual target material, size, travel path and repeatability when setting the gap; the 1 mm figure uses an iron reference target.
  • Verify mechanical clearance for an 8 mm-diameter, 45 mm-long body and follow the current mounting instructions for adjacent metal.
  • Obtain the exact supply, wiring and load information before connecting power or specifying the installation.

Frequently asked questions

Is SZ-M8-1DN an NPN or PNP sensor?

It is the DC NPN normally open model. The 1 mm PNP normally open code in the supplied range is SZ-M8-1DP.

Will the full 1 mm range apply to stainless steel or aluminum?

The 1 mm value is specified with an iron reference target. The available specification warns that non-magnetic metals reduce detection distance, so test the actual part and operating gap.

Can this model be changed to 2 mm or 3 mm sensing?

No. The listed 2 mm and 3 mm NPN NO versions have different model codes: SZ-M8P-2DN and SZ-M8P-3DN.

What should be checked before wiring?

Confirm the current datasheet’s supply voltage, connection details and rated output load for the exact supplied model, then match the NPN NO signal to the controller input.

Reviews

There are no reviews yet.

Be the first to review “SZ-M8-1DN M8 1 mm Flush Mount Proximity Sensor”

Your email address will not be published. Required fields are marked *