Static vs. Dynamic Ring Sensors: How Their Detection Methods Differ
Static ring sensors can maintain a metal-presence indication while a suitable target remains in the sensing zone. Dynamic ring sensors detect passing metal through the change it produces and are used for passage-event monitoring. Choose between them by deciding what the machine must know: whether a part is still present, or whether a part has passed the sensing point. Then verify that the selected model can detect the actual target and deliver the required signal throughout the machine cycle.

The distinction is more useful than simply calling one sensor “for stationary parts” and the other “for moving parts.” Static detection can also register moving parts. A dynamic output pulse, meanwhile, should not be treated as proof that a part remains inside the ring. The following comparison concerns inductive ring sensors for metallic targets.
Quick Comparison: Static vs. Dynamic Ring Sensors
Use the required machine information as the starting point. The labels describe detection behavior; they do not establish a universal speed, minimum part size or electrical connection.
| Comparison point | Static detection | Dynamic detection |
|---|---|---|
| Main information needed | Metal present within the sensing zone | A metal part passing the sensing point |
| Part held inside the ring | Suitable starting point for a maintained presence indication | Do not assume the output confirms continued occupancy |
| Moving parts | Can detect passage when target and timing conditions are met | Intended for passage-event applications within documented conditions |
| Small or fast targets | Check the resolution and operating limits for the selected mode | Check the same conditions; a dynamic label alone does not prove better performance |
| Output timing | Presence evaluation and any configured output delay must be distinguished | A timed pulse may represent the event; its duration is a separate setting or specification |
| Application validation | Verify presence, absence and required transitions | Verify passage events, pauses, restart and separate event capture |
The first decision is the meaning of the signal. Mechanical fit, target detectability and input compatibility must then support that decision; none is established by choosing a mode name.
How Static and Dynamic Ring Sensors Detect Metal
An inductive ring sensor places a sensing coil around an opening. The coil produces a magnetic field, and a conductive metal target within that field produces eddy currents that affect the sensing system. The ring arrangement allows a part to travel through the opening rather than approach the face of a conventional cylindrical sensor.
Static and dynamic evaluation use the metal-related signal for different purposes. This is a functional comparison, not a claim that every manufacturer uses the same internal circuit or signal-processing algorithm.
Static Detection: Maintaining a Presence Signal
Static evaluation can continue to indicate a suitable target after it has stopped. Its useful information is the occupied state of the sensing zone. That makes it a logical starting point when a control sequence needs to know whether metal remains at a particular position.
Movement is not excluded. A part that enters and leaves creates changes between occupied and unoccupied conditions, so static detection can also support passage monitoring. Whether those changes become usable counts depends on the actual part, the time it influences the sensor, the separation from the next part and the receiving input.
Treat presence as a detection condition, not a physical guarantee that every object inside the opening will be recognized. A target that fits mechanically still has to meet the model's sensing conditions. Establishing that distinction prevents a large aperture from being mistaken for assured detection of a very small production part.
Dynamic Detection: Responding to a Passing Part
Dynamic evaluation is intended to recognize a passing part from the change it causes. The resulting output can be a pulse whose duration is defined or adjusted by the device. This provides an event that a machine can use to acknowledge a passage, subject to the electrical and timing conditions of the input.
An event and a continuing physical state answer different questions. Once a part has generated a passage signal, that signal alone does not tell the machine where the part is now. It may have left the ring, stopped inside it or continued toward another station. The machine must not assign a stronger meaning to the event than the sensing arrangement can support.
The response to a slow approach, a held target, withdrawal or a second arrival depends on the specific implementation. Confirm these behaviors in the current model documentation and during testing rather than assuming a standard entry-and-exit waveform.
What Happens When a Part Slows Down or Stops?
Normal production speed is only one part of the operating cycle. A useful comparison also considers a part waiting in the ring, intermittent feeding and the first part after a pause. These conditions reveal whether the selected mode supplies the information the controller expects.
A Part Held Inside the Ring
Consider a proposed station in which a metal part enters the sensing zone and waits for the next machine action. If the controller needs confirmation throughout that wait, test for a maintained occupied-state indication. A static mode is the appropriate starting point, provided the target remains detectable at every permitted position.
For a dynamic device, a pulse produced during arrival is not sufficient evidence of continued presence. A timed output can remain active for its configured interval without proving that the part is still there. Conversely, the end of that pulse need not prove that the part has left. The exact behavior should be measured, but neither assumption belongs in the control logic without support.
Record the arrival, the full hold period and the removal as separate observations. Compare the target's physical state with both the sensor output and the controller indication. This exposes a mismatch that a quick pass-through test would miss.

Slow Movement, Feed Pauses, and Restart
A successful test at normal speed does not qualify a slower startup or a stop-and-go movement. For a dynamic candidate, ask whether its documented operating conditions include a lower speed limit or restrictions on how the target moves through the zone. Do not infer that arbitrarily slow motion is acceptable from a published maximum speed.
Feed restart and power-up also require different checks. After a feed pause, the sensor may still be powered and ready, but the first target's position and motion may differ from steady production. After power-up, the device's ready-state behavior adds another condition. Define when the machine may accept an event, then test that sequence with the intended settings.
Include both an empty ring and a target already in the zone when testing the permitted restart conditions. The result should establish whether the machine recovers the required state or event without losing or inventing a count. These are commissioning questions, not universal predictions about every ring sensor.
Match the Detection Method to the Machine Task
Write the desired machine decision before selecting a sensor. “Confirm that metal is still at this position” and “confirm that one part passed during this feed cycle” require different evidence, even when the parts use the same tube.
Presence and Accumulation Monitoring
For a proposed accumulation check, locate the ring where retained metal would provide a useful indication. Static detection may support that occupied-state requirement. The machine logic must still decide when occupancy is normal and when it indicates a problem. A part deliberately waiting for release should not be diagnosed as a blockage simply because it remains present.
The sensing location also limits the conclusion. An occupied ring reports a local condition; it does not locate every obstruction along the feed path. A jam upstream could leave the ring empty. Combine the local signal with the commanded machine phase and the expected sequence of arrivals or clearances before assigning a fault.
This gives a more useful specification than “jam detection”: identify the location, the state to detect and the condition under which that state should trigger an action.
Passage Confirmation and Part Counting
For a proposed screw-feeding operation, the immediate requirement may be confirmation that a screw crossed the monitored point during the delivery cycle. Dynamic detection is a candidate for that event, while a suitable static sensor may also provide usable passage transitions. Compare the actual target and operating conditions rather than excluding one method solely by its name.
Mode-specific target resolution deserves attention. For example, the ifm I7R205-02 datasheet distinguishes the steel-ball resolution of its static and dynamic modes. That documents a difference within that particular device; it does not establish a universal advantage for dynamic sensing or a capability of an XSZ model. A production spring or irregular fastener needs its own qualification.
Counting adds a requirement beyond detecting some metal: each intended part must create a distinguishable recorded event. Test closely spaced parts and the permitted feed arrangements. Also keep passage confirmation separate from arrival at a downstream tool. A sensor at the tube entrance cannot, by that signal alone, confirm the final seating of the part elsewhere.
Separate Detection Mode from Output Timing
Keep three questions separate: what physical condition is evaluated, how the sensor presents the result, and how the machine receives it. Changing the second does not necessarily correct a problem with the first or third.
Pulse Stretching and Closely Spaced Parts
Pulse stretching makes an output persist longer so that the receiving input has an opportunity to register it. It cannot create an event that the sensing system never detected. If an unsuitable target does not produce a valid detection, increasing the output duration does not repair the target-detection problem.
A longer signal can also complicate the separation of nearby events. If two arrivals occur before the output has returned to the state required for another count, an edge-counting input may see only one transition. Depending on the sensor, an additional arrival might extend the active period, be treated as a new event or be handled differently. The retrigger and recovery behavior must be checked for that model.
Set timing from the required event sequence and the input's documented conditions. Then test both isolated parts and the shortest permitted separation. The objective is a readable event with sufficient distinction between parts, not simply the longest available pulse.
Switching Logic and Controller Input Capture
Static or dynamic operation is separate from NPN/PNP electrical output and normally open/normally closed switching logic. Some devices offer configurable choices; others have fixed configurations. Confirm the exact order code and settings instead of assuming that a selectable principle implies every other option is selectable too.
Define what the programmable logic controller (PLC) should recognize as the event or occupied state. Match the output circuit to a compatible input and check the input's filter, timing and counting behavior. A visible sensor indication confirms neither that the electrical input recognized the signal nor that the program recorded the intended event.
Compare the sensor output with the controller record during the same trial. If the sensor produces the required events but the record is wrong, investigate input capture and program interpretation before changing the sensing mode. If the sensor itself misses the target, first return to target suitability, path, settings and operating conditions.
Validate the Detection Method Before Selecting a Model
A useful trial preserves the installation and sequence that can change the answer. Use representative production parts, the intended tube or guide, the final mounting arrangement and documented settings. Keep the sensor's record separate from the controller's record so that a failure can be located.
Test Passage, Hold, Removal, and Restart
Use a controlled test arrangement operated by qualified personnel under the machine's prescribed safety procedures. Isolate hazardous motion when arranging or retrieving samples; do not place hands or loose test pieces into running equipment to simulate a fault.
- Define the expected result. State whether the machine needs maintained presence, one passage event or a count. Record the selected mode, output logic and timing settings before the trial.
- Establish the empty condition. Check the installed arrangement without the intended target. Record the sensor and controller states so that later changes have a clear reference.
- Pass representative parts. Include the relevant material, shape and position variation across the intended speed range. Compare individual arrivals with the received events, not just the final total.
- Hold and remove a target where the process permits it. Observe the complete hold period and removal. For a presence requirement, confirm the maintained state; for an event requirement, identify what the output actually does without treating it as an occupancy signal.
- Test pauses and restart. Check the first required event after feeding resumes. Separately test any permitted power-up sequence, including the device's documented readiness conditions.
- Challenge event separation. Run the shortest permitted part spacing and compare the output with the controller record. If events cannot be distinguished, review the feed arrangement, pulse processing and input capture together.
Retain enough information to reproduce an unsuccessful trial: part identity, path, motion sequence, settings, output behavior and received result. Equal end totals alone are insufficient if an extra event could have offset a missed one. Acceptance should match the actual machine requirement and reference observations rather than an invented universal trial count or accuracy percentage.
Information to Confirm with the Supplier
Provide the application information that affects mode choice and request a response tied to a specific model:
- The machine decision: continued occupancy, passage confirmation or individual counting.
- Target material, shape, size variation and representative samples, including the most difficult intended part.
- Aperture and installation constraints, the tube or guide, and the permitted path through the ring.
- Normal, slowest and fastest motion, hold periods, feed pauses and restart conditions.
- Minimum part separation and whether the feed mechanism controls parts individually.
- The controller input, electrical output requirement, switching logic and relevant input filtering or counting settings.
- The required mode, sensitivity setup, pulse-processing behavior, readiness conditions and proposed acceptance observations.
When discussing an XSZ ring sensor, confirm its documented operating principle before treating it as a static, dynamic or selectable-mode solution. The right choice is the one that supplies the information your machine requires with the actual parts and operating sequence, and that retains that behavior through the receiving input.
Technical Sources
- ifm — Smart inductive ring sensors with IO-Link: overview. Static and dynamic application terminology; broad family statements do not establish individual model limits.
- ifm — I7R205-02 EN-GB datasheet, 30 March 2026. Model-specific separation of operating principle, target resolution, electrical design and output settings.
- wenglor — IR2D002 Operating Instructions, version 2.3. Inductive ring operation, installation and output-timing functions; see especially pages 6, 8, 13 and 15–17.
- wenglor — IR2D002 technical data. Current model-specific motion and adjustable-output conditions. Use the applicable current documentation when specifying a device.