Inductive Proximity
Non-contact detection of nearby metal parts. Working distance changes with material, target size and mounting.
Describe the target, movement and mounting. This tool suggests a sensing technology to investigate, then shows what you still need to verify before selecting a model.
Answer four questions to narrow the sensor family.
1. Describe the detection pointUse the four required inputs to identify a likely technology family, not a part number.
2. Add useful measurementsOpen the optional fields if you know the largest gap, smallest target or electrical requirements.
3. Verify on the machineCompare datasheets and test the difficult target, position and environment before ordering.
Explore the most relevant technologies after defining the target and detection geometry. These are technology starting points, not interchangeable solutions.
Non-contact detection of nearby metal parts. Working distance changes with material, target size and mounting.
A candidate for suitable non-metal targets and some level-detection tasks, including through-wall sensing when conditions permit.
Detects suitable metal items moving through a defined aperture. Check minimum part size, position and pulse response.
Detects an edge or object as it passes between two fixed arms. Confirm slot dimensions and smallest feature size.
Photoelectric object detection when target-to-background separation matters. Validate difficult surfaces with samples.
Position indication using a compatible magnet in the moving assembly. Check orientation and switching positions.
A technology match does not automatically mean the device will switch reliably on your machine. Before ordering, confirm the actual detection point and the electrical interface.
Identify material, size, orientation, surface and travel path. Verify the most difficult expected part.
Check actual working gap, background, nearby metal, housing clearance and aperture or slot dimensions.
Confirm supply voltage, PNP/NPN, NO/NC, controller input and response time at production speed.
Account for dust, oil, washdown, ambient light, vibration, deposits and operating temperature.
Different tasks lead to different sensing approaches. These examples are starting points to evaluate, not guaranteed model recommendations.
Confirm presence of a moving metal component without contact. Check metal type and sensing gap.
Consider: Inductive proximityExplore non-contact level detection from outside the wall. Confirm wall thickness, contents and buildup.
Consider: Capacitive proximityCount suitable metal parts passing through an aperture; verify smallest item and maximum feed speed.
Consider: Ring proximitySeparate the package from the surface or fixture behind it. Test all colors and distances.
Consider: BGS photoelectricSend your target material, smallest part size, working distance, mounting arrangement, speed and control-system output. Photos or drawings make engineering review more useful.
No. It narrows the likely sensing technology and gives checks to complete. Model-specific distance, minimum target, response time, housing, wiring and environmental ratings must be confirmed from the datasheet and an application test.
Ordinary inductive proximity sensors are intended for metal targets. Non-metal targets may call for capacitive or optical detection depending on the material, geometry, distance and environment.
Consider a ring sensor for suitable metal parts passing through an aperture. Consider a slot photoelectric sensor for a part or edge passing between a fixed emitter and receiver. Aperture or gap size and movement need to be checked on real equipment.
Optical performance depends on sensor principle, target surface and geometry, lighting and background. Test representative target samples over the full working range. Transparency alone cannot confirm a specific sensor will work.
Send target material and minimum size, sensing position and movement path, minimum/maximum distance, mounting space, voltage, PNP/NPN and NO/NC requirements, speed and environment. An application photo, sample or mechanical drawing is useful.
No. They make your inquiry more useful, but this tool does not compare measurements against live XSZ model specifications. Check the relevant datasheet and confirm performance with representative samples.
Technical guidance is preliminary. A site-specific safety assessment and final machine approval are outside the scope of this selector.