Professional Industrial Sensor Manufacturer
XSZ Sensor

XSZ engineering worksheet

Sensor Application Requirements Builder

Turn a rough sensing problem into a clear application brief. Start with four essentials, add the details you know, then copy the result into an engineering inquiry. Unknown values stay marked for confirmation rather than becoming guessed specifications.

Build your brief

Describe the application

You can leave anything unknown blank. The draft will show the questions still to confirm.

Core details0 of 4 provided

Add engineering details

Open only the sections relevant to your application.

Motion and sensing geometry
Mounting and environment
Electrical and controller interface
Existing model and project needs

This worksheet stays in your browser. It does not send information to XSZ automatically.

How to use the requirements builder

Start with the problem your machine needs to solve. The tool organizes facts and unknowns; it does not choose or approve a sensor model.

1 / Describe

Enter the detection task

Identify the target, required gap and action the control system should take after detection.

2 / Refine

Add conditions you know

Include speed, nearby objects, mounting, exposure, power and output needs where available.

3 / Share

Copy the brief

Review the open questions, then paste the brief into the inquiry popup with a photo or drawing if possible.

Why these requirements matter

Two applications can ask for “the same sensor” while differing in the details that determine whether it will detect reliably or connect correctly.

Detection is not only a distance number

Target material, size, approach direction and nearby structures can affect the usable sensing arrangement. Datasheet sensing distance may be based on a specified standard target and test condition.

Electrical fit is a separate decision

Supply voltage, output type, NO/NC behavior and controller input details must match the intended circuit. A suitable sensing principle does not fix a wiring mismatch.

Example application brief

This illustrates useful detail—not a sensor recommendation or a verified specification.

Conveyor bracket countingDetect one 12 mm steel tab as each bracket passes the station. The estimated face-to-target gap is 8 mm; the line runs up to 120 brackets per minute. A 24 V DC supply and PNP normally open input are requested. The sensor must fit an M12 mounting position near a steel frame. The target path and actual clearance still need confirmation with a drawing.

Frequently asked questions

Do I need every field before contacting XSZ?

No. Start with the detection task, target and approximate geometry. The copied brief lists unanswered core questions for follow-up.

What if I do not know the sensing distance?

Leave it blank and describe where the target passes relative to the mounting point. A sketch or photograph with dimensions is more useful than a guessed gap.

Does this tool recommend a sensor model?

No. It structures the information needed for model review. Final selection requires the exact datasheet, wiring requirements and testing with representative targets and operating conditions.

Why ask about target size and material?

Detection performance can depend on the target and how it approaches the sensing face. Datasheet distance figures are not automatically valid for every material, shape or installation.

What is the difference between output type and switching logic?

Output type describes the electrical interface, such as PNP or NPN. Switching logic describes when the output turns on, such as NO or NC. If you do not know these, include the controller model instead.

Is my information sent when I fill the worksheet?

No. The worksheet updates locally. Only an inquiry you choose to submit through the separate popup is sent; you must copy and paste the brief into that popup yourself.

Ready for an application review?

Use your brief to explain the target, sensing geometry, environment and electrical interface. Add a drawing or photo in the inquiry popup if available.

Ask an XSZ engineer

Technical context: OMRON’s proximity-sensor overview discusses target types and installation effects; its terminology guide defines sensing distance and response frequency; Balluff’s wiring guide explains output interfaces. Check the exact model documentation before selection.