D06-NP Dual Light Indicator Proximity Sensor

The XSZ D06-NP is described as a non-contact proximity sensor with two visible status indicators. Local indication can help technicians observe sensor behavior during setup and troubleshooting. The supplied material does not establish the sensing technology, target material, working distance, supply voltage, output logic or indicator color/function mapping; match those details to the selected unit before installation.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

Description

D06-NP proximity sensing with local status indication

The XSZ D06-NP is a non-contact proximity sensor described with two visible indicators. These lights give technicians a local reference when checking the sensor during setup, adjustment or maintenance.

The supplied information does not assign a specific function to each light or identify the sensing technology. Confirm the indicator behavior and detection conditions for the exact unit before using its signals in a control system.

What the two indicators help you check

Visible indication can make an on-machine check easier: a technician can compare the light response with target movement and the controller input while setting the detection point. This is useful when a sensor is replaced or a machine stops unexpectedly, but indicator lights do not replace a wiring check or a functional test.

Confirm the indicator map first

The source calls this a dual-light design without a verified color-to-function chart. Use the D06-NP manual or label to identify what each light means before diagnosing power, target or output status.

D06-NP product information and open specifications

The supplied description identifies the model and general detection method but gives no numeric operating data. The unfilled specification points below must be checked against a current model datasheet rather than inferred from the model name.

ModelD06-NP
Product typeProximity sensor / proximity switch
Detection methodNon-contact proximity detection; sensing principle not specified
Local indicationTwo visible status indicators; individual functions require confirmation

Target material and size, sensing distance, supply voltage, output type, switching logic, dimensions, cable or connector, response time and environmental rating are not established by the supplied product information.

Where D06-NP may fit in a machine

D06-NP can be evaluated for non-safety presence or position checks at a defined machine point. A possible use could be checking a moving component or workpiece near a limit position, provided the actual target is detectable and the selected sensor’s electrical output matches the controller.

Selection and installation checks

  • Identify the target material, dimensions, approach direction and required switching point.
  • Check the rated sensing distance with the real target and mounting arrangement.
  • Match supply, output polarity, switching logic and wiring to the controller input.
  • Confirm the housing dimensions, cable route and operating environment before fixing the bracket.

Frequently asked questions

What do the two indicator lights show?

They provide visible status feedback, but the supplied description does not define each light’s color or function. Check the marking or current D06-NP manual before interpreting a light as power, detection or output status.

What targets and sensing distance are specified?

Neither target material nor rated distance is given in the supplied information. Verify both against the exact sensor specification and test with the intended target.

Is D06-NP an NPN or PNP sensor?

The old page asks buyers to confirm NPN or PNP; it does not identify this model’s output. Do not infer the output from the model suffix. Use the product label and wiring diagram.

Can the sensor be used for a machine limit?

It may be evaluated for a non-safety position signal after the target, distance, response and controller interface are verified. The supplied information does not establish a personnel-protection or safety-rated function.