SZC-M18-5DN M18 5 mm Shielded NPN NO Proximity Sensor

The XSZ SZC-M18-5DN is the shielded M18 DC NPN normally open (NO) selection in the supplied proximity-sensor range. The legacy specification lists a 5 mm ±10% sensing distance, a 0–4 mm setting distance, 70 mm body length, 18 mm diameter and 10–30 VDC operation. Confirm the actual target material, connection and current rating against the current exact-model datasheet before installation.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

Description

SZC-M18-5DN product overview

The XSZ SZC-M18-5DN is the shielded M18 DC NPN normally open (NO) selection in the supplied proximity-sensor range. Its listed 5 mm ±10% sensing distance and 0–4 mm setting distance are references for planning a close-range detection point.

The housing is listed at 18 mm in diameter and 70 mm in body length. Match the actual target, available mounting space and controller input to the exact model before installation.

ModelSZC-M18-5DN
Installation typeM18 shielded
Listed sensing distance5 mm ±10%
Electrical outputDC NPN, normally open

5 mm shielded sensing and target checks

The 5 mm figure is the listed sensing distance; the separate 0–4 mm setting distance is the more practical starting point for selecting an installed gap. Neither figure proves the same response for every target material, size or shape.

Use a representative target and the intended mounting arrangement to verify detection. The supplied family table does not specify a standard test target or material-by-material range for SZC-M18-5DN.

Technical specifications

These figures come from the supplied M18 range specification. Obtain the current exact-model datasheet and drawing before finalizing a machine design.

Sensing and housing

Installation typeM18 shielded
Body dimensions18 mm diameter; 70 mm body length
Sensing distance5 mm ±10%
Setting distance0–4 mm
Switching hysteresisLess than 15% of Sr (source notation)
IndicatorLED

DC NPN NO electrical data

Output configurationDC NPN, normally open (NO)
Operating voltage10–30 VDC
Supply rippleLess than 10% (source-listed)
Response frequency0.5 kHz (DC type)
Voltage dropLess than 1.5 V (source-listed)
Circuit protectionShort-circuit protection (source-listed)

Materials and operating environment

Housing materialNickel-plated copper
Sensing faceABS
Operating temperature0 to +60 °C
Temperature driftLess than 10% of Sr (source notation)

Related M18 model codes

SZC-M18-5DN is the shielded DC NPN NO product on this page. The other codes below are separate shielded or non-shielded output selections, not switchable modes of this unit.

MountingOutputModel code
ShieldedDC NPN NOSZC-M18-5DN — this product
ShieldedDC NPN NCSZC-M18-5DN2
ShieldedDC PNP NOSZC-M18-5DP
ShieldedDC PNP NCSZC-M18-5DP2
ShieldedAC two-wire NOSZC-M18-5AO
ShieldedAC two-wire NCSZC-M18-5AC
Non-shieldedDC NPN NOSZC-M18-8DN
Non-shieldedDC NPN NCSZC-M18-8DN2
Non-shieldedDC PNP NOSZC-M18-8DP
Non-shieldedDC PNP NCSZC-M18-8DP2
Non-shieldedAC two-wire NOSZC-M18-8AO
Non-shieldedAC two-wire NCSZC-M18-8AC

The supplied table lists the separate non-shielded group at 10 mm ±10% sensing distance and 0–8 mm setting distance. Those values do not apply to the 5 mm shielded unit.

Applications and installation checks

The shielded M18 format may be evaluated for a close-range object-presence point when the actual target, sensing gap and NPN NO controller input are confirmed. Do not assume identical response across different target materials from the distance figure alone.

Confirm before ordering

  • Target material, size and shape at the planned 0–4 mm installed gap.
  • 10–30 VDC supply and NPN NO input compatibility with the controller.
  • Required switching speed and allowable output/load current.
  • Current dimensional drawing, connection/wiring type and environmental rating.

Frequently asked questions

What is the sensing distance of SZC-M18-5DN?

The shielded model is listed at 5 mm ±10%, with a separate 0–4 mm setting distance. Verify the actual target at the intended mounting gap.

Is SZC-M18-5DN NPN normally open?

Yes. The supplied model matrix places this code in the DC NPN NO row. The other NPN, PNP and AC codes are separate versions.

Can the non-shielded range be used for this model?

No. The non-shielded M18 models have their own codes and a separate source-listed distance. The 5 mm shielded specifications describe SZC-M18-5DN.

What still needs confirmation for installation?

Confirm target compatibility, output/load current, wiring, cable and mounting details using the current datasheet for this exact model.

Reviews

There are no reviews yet.

Be the first to review “SZC-M18-5DN M18 5 mm Shielded NPN NO Proximity Sensor”

Your email address will not be published. Required fields are marked *