SZC-M8-1DN M8 1 mm Shielded Proximity Sensor

The XSZ SZC-M8-1DN is a shielded M8 proximity sensor with a listed 1 mm ±10% sensing distance and 0–0.8 mm setting distance. The supplied model matrix identifies this DC unit as NPN normally open (NO). Its 8 mm diameter, 45 mm body length and 10–30 VDC supply suit close-range sensing points where the target material, controller input and installation gap have been verified.

  • Factory Direct Supply
    Stable Quality
  • Custom Options
    Support OEM/ODM
  • Technical Support
    Quick Response

Description

Shielded M8 close-range sensing

SZC-M8-1DN product overview

The XSZ SZC-M8-1DN is a compact, shielded M8 proximity sensor for close-range presence and position checks. Its listed sensing distance is 1 mm ±10%, with a 0–0.8 mm setting distance. The DC model matrix identifies this exact code as an NPN normally open (NO) version.

The 8 mm diameter and listed 45 mm body length help when bracket space is limited. Match the sensing gap to the real target and verify the controller input and wiring for the supplied unit.

A 1 mm shielded sensing point

The 1 mm ±10% figure is the listed sensing distance; the specified 0–0.8 mm setting distance is the practical range to consider when positioning the sensor in the machine. Check the smallest expected operating gap and allow for normal movement of the target and bracket.

This model is listed with a 100 Hz response frequency. That number should be assessed alongside the actual object size, approach path and machine timing rather than treated as a guaranteed detection rate for every application.

SZC-M8-1DN technical specifications

Sensing and mechanical data

Model / mountingSZC-M8-1DN / M8 shielded
Sensing distance1 mm ±10%
Setting distance0–0.8 mm
Response frequency100 Hz
Body dimensions8 mm diameter; 45 mm listed body length
HousingNickel-plated copper
Sensing faceABS

Electrical and environmental data

Supply / output10–30 VDC / NPN normally open
Supply rippleLess than 10%
No-load currentLess than 8 mA
Maximum load current150 mA
Leakage currentLess than 0.01 mA
Voltage dropLess than 1.5 V
Switching hysteresisLess than 15% (Sr)
Temperature driftLess than 10% (Sr)
Protection / indicationShort-circuit protection; LED indicator
Environmental ratingIP65
Operating temperature0 to +60 °C

Confirm target-material compatibility, cable or connector configuration, wiring and the current dimension drawing for the exact orderable unit.

Related M8 model codes

The supplied M8 matrix distinguishes output and mounting configurations by separate model code. These are comparison options, not switchable settings of SZC-M8-1DN.

ModelMountingDC outputListed sensing distance
SZC-M8-1DNShieldedNPN NO1 mm ±10%
SZC-M8-1DN2ShieldedNPN NC1 mm ±10%
SZC-M8-1DPShieldedPNP NO1 mm ±10%
SZC-M8-1DP2ShieldedPNP NC1 mm ±10%
SZC-M8-2DNNon-shieldedNPN NO2 mm ±10%
SZC-M8-2DN2Non-shieldedNPN NC2 mm ±10%
SZC-M8-2DPNon-shieldedPNP NO2 mm ±10%
SZC-M8-2DP2Non-shieldedPNP NC2 mm ±10%

Applying the sensor in compact equipment

A small M8 body can be considered for a close-range fixture or machine station where a target passes within the verified setting distance. For a retrofit, check the 45 mm listed body length against the available depth and leave room for the actual cable or connector arrangement.

Before specifying SZC-M8-1DN

  • Confirm that the real target material and size produce the required response at the chosen gap.
  • Check that NPN NO logic and 10–30 VDC supply match the controller and wiring diagram.
  • Allow for bracket movement, target tolerance and the exact cable or connector exit.
  • Verify IP65 and the 0 to +60 °C listed range against the actual operating environment.

Frequently asked questions

What are this model’s sensing and setting distances?

SZC-M8-1DN is listed at 1 mm ±10% sensing distance, with a 0–0.8 mm setting distance. Test the actual target and mechanical gap in the intended position.

Does SZC-M8-1DN provide NPN normally open output?

Yes. The supplied model matrix identifies the 1DN code as DC NPN NO. The NC and PNP codes refer to separate models.

Can it detect my specific material?

Target compatibility is not established for every material by the available model information. Share the actual material, size and sensing gap and validate it against the exact datasheet or a sample test.

Is the 2 mm M8 version the same product?

No. The matrix lists 2 mm non-shielded versions under separate `SZC-M8-2` model codes. Confirm mounting type and output code before ordering.

Reviews

There are no reviews yet.

Be the first to review “SZC-M8-1DN M8 1 mm Shielded Proximity Sensor”

Your email address will not be published. Required fields are marked *