Description
GTB2S ultra-small BGS sensor overview
The XSZ GTB2S range is an ultra-small DC 4-wire background-suppression (BGS) photoelectric sensor family. It includes NPN and PNP models in standard- and short-range selections. The standard-range models list 10–100 mm sensing distance; the short-range models list 30 mm, each measured with a 50 × 50 mm white-paper target.
Select the model by controller output type and required sensing range, then test the actual target against the intended background and installation distance. The four part numbers below are separate selections, not settings that convert one sensor into another model.
| Sensor family | GTB2S BGS photoelectric |
|---|---|
| Electrical format | DC 4-wire; NPN or PNP models |
| Standard range | 10–100 mm |
| Short range | 30 mm |
Background suppression and target testing
BGS is intended to help distinguish a target from surfaces behind it at the selected distance. The published range figures use a 50 × 50 mm white-paper target; they should not be treated as guaranteed values for every material, color, angle or background.
When choosing between the 10–100 mm and 30 mm versions, check the target’s size and position, the background distance, and the available mounting space. Test the selected model using the real workpiece and machine conditions before finalizing the sensing point.
Technical specifications
The values below are listed for the GTB2S range. Confirm the current datasheet and wiring drawing for the exact NPN or PNP model before installation.
Range and model selection
| Range | Output | Model |
|---|---|---|
| 10–100 mm | NPN | GTB2S-N1030 |
| 10–100 mm | PNP | GTB2S-P1030 |
| 30 mm | NPN | GTB2S-N1451 |
| 30 mm | PNP | GTB2S-P1451 |
Both range entries use a 50 × 50 mm white-paper reference target. Confirm the sensing setup with the intended workpiece.
Supply, output and response
| Power supply | 12–24 VDC ±10%; ripple less than 10% |
|---|---|
| Current consumption | Less than 20 mA |
| Maximum load voltage | 26.4 VDC |
| Load current | Less than 100 mA |
| Residual voltage | Less than 1 V when load current is less than 50 mA |
| Output conductors | Black: normally open (NO); white: normally closed (NC). Verify the full NPN/PNP wiring diagram. |
| Protection circuits | Reverse-polarity and load-overcurrent protection |
| Action/reset time | 3 ms maximum |
Environment and housing
| Protection class | IP65 (IEC) |
|---|---|
| Case material | PC / ABS |
| Connection | Pre-wired cable; length not specified |
| Indicators | Operation: red; stability: green |
| Operating temperature | −25 to +55 °C |
| Storage temperature | −40 to +70 °C |
| Operating humidity | 35–85% RH |
| Storage humidity | 35–95% RH |
| Ambient incandescent light | 3,000 lx maximum |
| Ambient sunlight | 10,000 lx maximum |
Application and installation checks
The GTB2S range can be considered for presence detection of small parts or packaging components where the target and background are close together. Suitability depends on the actual surface, sensing distance, mounting angle and process speed; validate these with the selected model in the machine.
Before choosing a GTB2S model
- Choose standard or short range using the target and background distances, then select NPN or PNP for the controller.
- Test the actual object against the white-paper reference values; check target color, surface, size and angle.
- Confirm the full wiring diagram for black/white outputs and power connections before energizing the sensor.
- Check mounting dimensions, cable length, environmental exposure and timing requirements for the installation.
Frequently asked questions
Which model covers 10–100 mm?
GTB2S-N1030 is the NPN standard-range model, and GTB2S-P1030 is the PNP standard-range model. The distance is listed with a 50 × 50 mm white-paper target.
Which models are listed at 30 mm?
GTB2S-N1451 and GTB2S-P1451 are the NPN and PNP short-range selections. Confirm how the 30 mm value is set for the actual target.
Does BGS eliminate every background or color effect?
No universal independence is established by the available specifications. Check the chosen model with the real target and background at the intended distance.
What must be checked before wiring?
Confirm the exact NPN or PNP model, 12–24 VDC supply, controller input, black/white output functions and the full approved wiring diagram.
