Professional Industrial Sensor Manufacturer
XSZ Sensor

Sensor Terminology

IP Rating

Meaning, Structure and How to Choose

An IP rating tells you which dust and water ingress tests a sensor enclosure has passed. Learn how to read the code, compare common ratings and check the conditions that matter in your installation.

Learn More
Illustrative stainless-steel proximity sensor in a wet industrial setting

What Is an IP Rating?

IP stands for International Protection. Under IEC 60529, the IP code classifies the protection provided by an electrical enclosure against access to hazardous parts, solid foreign objects and water. For sensors, it helps you compare enclosure protection—not sensing performance or chemical resistance.

A rating such as IP67 combines two independent digits. The first is about solid objects and dust; the second is about water. Read both digits together with the exact product datasheet and installation instructions.

How Do You Read the IP Code?

Each digit describes a different test category. X may replace a digit when that category has not been specified; it does not mean zero protection.

First digit · solid objects and dust

0No specified protection
1Protected against solid objects 50 mm and larger
2Protected against solid objects 12.5 mm and larger
3Protected against solid objects 2.5 mm and larger
4Protected against solid objects 1 mm and larger
5Dust-protected; limited ingress must not impair operation
6Dust-tight

Second digit · water exposure

0No specified protection
1Vertically falling drops
2Vertically falling drops with enclosure tilted up to 15°
3Spraying water up to 60° from vertical
4Splashing water from any direction
5Water jets
6Powerful water jets
7Temporary immersion under defined test conditions
8Immersion under conditions specified for the product
9High-pressure, high-temperature water jets (IEC 60529)

Do not treat water digits as one simple ladder. An enclosure rated only IPX7 or IPX8 has not automatically passed jet tests IPX5 or IPX6. If the site has both washdown and immersion, look for each required rating on the same product.

Common IP Ratings for Industrial Sensors

These codes describe test exposure, not a universal promise for every installation. Check the exact model and assembled connection.

Illustrative sensor exposed to a water jet above the water surface

IP65

Dust-tight; protected against water jets. Useful where a sensor may be sprayed, but not specified for immersion.

Check nozzle exposure and cleaning method.
Illustrative sensor temporarily submerged in a clear water tank

IP67

Dust-tight; protected against temporary immersion under the defined test. It does not by itself establish jet resistance.

Typical IEC test: 1 m / 30 min for a small enclosure.
Illustrative sensor fully submerged in a water tank under specified conditions

IP68

Dust-tight; protected against immersion under conditions stated for that specific product.

Confirm permitted depth, duration and operating state.
Illustrative sensor exposed to a close high-pressure washdown spray

IP69K

Dust-tight; tested against high-pressure, high-temperature water jets under a K-code specification.

Verify the cited standard, such as ISO 20653, and the exact test claim.

IP69 and IP69K are not interchangeable labels. IEC 60529 includes IPX9; ISO 20653 uses K-designated codes for road-vehicle electrical equipment. For industrial sensors, always check which standard the manufacturer actually cites.

How Do You Choose the Right IP Rating?

Start with the real exposure, then confirm the sensor, cable and connector as an installed assembly.

Identify dust and solids

Check airborne dust, metal chips and possible contact with moving or conductive debris. Select the first digit accordingly.

Define the water event

Rain, splashes, jets, immersion and hot washdown are different tests. Match the second digit to the actual exposure.

Check the full assembly

Confirm cable entry, mated connector, tightening and mounting instructions. A high-rated housing alone may not protect the installed connection.

Review other hazards

Check operating temperature, oils, detergents, corrosion and mechanical damage separately; the IP code does not rate them all.

Frequently Asked Questions

What does IP67 mean for a sensor?

The 6 means the enclosure is dust-tight. The 7 means it has passed a temporary immersion test under defined conditions. It is not a blanket guarantee of continuous underwater operation or resistance to every water-jet cleaning process.

Is IP68 always better than IP67 or IP66?

No. IP68 refers to product-specific immersion conditions, while IP66 refers to powerful water jets. A device carrying only an immersion rating is not automatically qualified for jets. Compare the test exposure you need and look for multiple ratings when necessary.

What is the difference between IP69 and IP69K?

IPX9 is the high-pressure, high-temperature water-jet degree added to IEC 60529. K-designated codes, including IPX9K, are used by ISO 20653 for road-vehicle electrical equipment. Check the exact cited standard and test conditions on the product datasheet.

Can the cable or connector affect the installed IP rating?

Yes. A loose, unmatched or lower-rated connector, damaged cable entry or incorrect assembly can compromise protection at the connection even when the sensor housing has a high rating. Follow the manufacturer's assembly instructions.

Does an IP rating prove resistance to oil, cleaning chemicals or corrosion?

No. IP tests address specified solids and water exposure. Evaluate oils, detergents, salt, temperature and materials separately using the manufacturer's environmental and chemical-resistance information.